Mr-Glass Window Replacement Nationwide | TruePane Windows & Doors

Mr-Glass Window Replacement: The Oakland Park Owner’s Guide

If you have a Mr-Glass window that has failed, the replacement glass unit typically runs between $185 and $420 installed in Oakland Park, depending on size, glass package, and whether the sash needs rebuilding. We stock Mr-Glass-compatible insulated glass units and can usually complete the swap in one visit. Most Oakland Park homeowners discover the problem the same way: a window that fogs between the panes, a room that stays hot despite the AC running, or a sash that no longer seals tight against the frame.

Call (863) 264-3649

We are an independent window and door company, not affiliated with Mr-Glass. What that means for you is straightforward: we match the glass to your existing frame, we do not try to sell you a whole new window when the glass is the only thing that failed, and we stand behind the work in writing.

Which Mr-Glass Models This Applies To

Mr-Glass windows were installed across South Florida from the late 1990s through the 2010s, and Oakland Park has its share of them in the single-story homes built between the 1950s and 1980s. The most common lines we service are the Mr-Glass single-hung and horizontal slider series, along with a smaller number of casement and fixed-picture units. The compatibility detail that matters: Mr-Glass used different glass thickness options depending on the year and whether the window was ordered as an impact-rated unit or a standard single-pane upgrade.

The way to identify what you have is to look for the etched marking in the corner of the glass. Mr-Glass units typically carry a small oval or rectangular etching with a date code and sometimes a series designation. If the etching has worn off, we measure the thickness of the insulated glass unit and the width of the sash channel to match it. The OEM-versus-aftermarket question for Mr-Glass specifically comes down to this: the company’s later glass packages were mostly standard LoE coatings, and a quality aftermarket unit from a manufacturer like Cardinal or Guardian will match the performance at a better price. The one exception is impact-rated Mr-Glass glass, where we recommend staying with a tested and labeled impact unit to keep the window’s storm rating valid.

Signs Your Mr-Glass Window Replacement Is Failing

• Fog or condensation between the panes. The desiccant inside the spacer has absorbed all the moisture it can hold, and the seal has failed. Once you see fog, the insulating gas is gone and the unit has lost most of its thermal value.
• The glass feels warm to the touch on a summer afternoon. A failed Low-E coating or a lost argon fill means heat is transferring directly through the glass. In Oakland Park, where July and August push 90-plus degrees daily, you will feel it on the room side of the window.
• Drafts around the sash even when the window is closed and locked. The weatherstripping has compressed, or the sash has warped slightly. This is more common on Mr-Glass frames that have faced years of direct western exposure along Dixie Highway or Andrews Avenue.
• The window is hard to slide or lift, or it drops when you let go. The balance system or rollers are worn. Mr-Glass sliders, in particular, collect grit in the bottom track, and once the rollers flatten, the sash drags against the frame.
• A visible crack running edge to edge. Even a hairline crack compromises the structural integrity of the unit. In an impact-rated window, that crack means the window will not perform as rated in a storm, which is a safety issue, not just a cosmetic one.

Replacement Cost & What’s Included

For Mr-Glass window replacement in Oakland Park, most jobs fall between $185 and $420 per window installed. That includes removing the old sash if needed, ordering or supplying the correct insulated glass unit, reinstalling with new glazing tape or sealant, and hauling the old glass away. Larger fixed-picture windows, impact-rated glass, or units with internal grids and specialty tints will push toward the upper end of that range. A standard 36-by-48 horizontal slider with clear LoE glass is typically on the lower end.

Every quote is line-itemed on paper before work begins: glass, materials, labor, and disposal. There are no surprise line items on the bill. The work is covered by our Done Right Promise, and we register the glass manufacturer’s warranty in writing before our truck leaves your driveway. If it is not sealed right, it is not done, and you will know exactly what both warranty layers cover and for how long.

DIY or Call Us?

There are some things an Oakland Park homeowner can check safely. You can look for the glass etching I mentioned earlier, measure the visible glass width and height, and check whether the frame screws are tight. You can also tell us whether the window is single or double pane by looking at the edge profile.

What we do not recommend is pulling the sash and attempting a glass swap yourself. Mr-Glass frames, especially the older ones, use a specific glazing method, and getting a new unit seated wrong means a window that binds, leaks, or fogs again within a year. The glass alone can weigh 25 to 40 pounds, and broken tempered glass is a genuine hazard. The cost difference between doing it right and doing it twice is the only cost that matters. Call (863) 264-3649 and we will come measure, match, and quote it for free.

FAQs