Mr-Glass Custom & Geometric Windows Nationwide | TruePane Windows & Doors

Mr-Glass Custom & Geometric Windows in Oakland Park: What to Know First

TruePane Windows & Doors is an independent Mr-Glass service provider in Oakland Park, and we handle custom and geometric window work that most shops won’t touch: arched, radius, trapezoid, triangle, pentagon, and oversized openings. Most Mr-Glass custom or geometric jobs in Oakland Park run three to ten business days from quote to completion, depending on whether we’re repairing the existing unit or ordering a full replacement. Pricing falls between $450 and $2,800 for typical work, with the honest truth being that shaped windows cost more than rectangles because the glass, frame, and labor all carry a premium. This page is for Oakland Park homeowners with a Mr-Glass custom or geometric window that’s leaking, fogged, binding, or cracked, and who want a straight answer on what it takes to fix it. Call (863) 264-3649 and you’ll get a live person, not a phone tree.

Call (863) 264-3649

How Mr-Glass Products Fail - and How We Fix Them

Mr-Glass builds a solid aluminum and vinyl window, but custom and geometric shapes stress materials in ways a standard rectangular unit doesn’t. Here’s what we see regularly in Oakland Park homes:

• Corner seal failure on radius and arch top units. The Mr-Glass Arch Series and radius-topped picture windows concentrate thermal expansion at the curved corners. After six to ten years of Oakland Park sun and humidity, the corner seals break down and you get fog between the panes. We remove the sash, route out the failed sealant, rebuild the corner with structural-grade sealant, and replace the desiccant strip so the unit dries out properly.
• Trapezoid and triangle window binding at the hinge points. Geometric Mr-Glass windows with operable vents (the Triangle and Trapezoid Series) have pivot hardware that shifts as the frame expands and contracts. The window starts to bind in July, and by August you can’t open it without forcing it. We realign the sash, re-shim the frame, and replace worn pivot pins before the glass takes stress it wasn’t designed to carry.
• Oversized opening sag on Mr-Glass picture windows over 72 inches. Large fixed units in the Mr-Glass Horizon line can sag in the frame if the original installer didn’t set the weight-bearing shims correctly at the corners. The glass stays intact, but the reveal gets uneven and the unit starts pulling on the rough opening. We pull the sash, reset the shim pattern from scratch, and re-level the unit so the load sits where the frame was engineered to carry it.
• Weep hole clogging on custom coastal-style windows. Mr-Glass units with mill finish frames and exposed weep holes (common on the Bayshore coastal line) collect sand, salt, and leaf debris in Oakland Park’s wet season. Water backs up, sits against the glass edge, and works its way into the seal. We clean the weep channels, verify drainage under a hose test, and apply a marine-grade sealant where the frame meets the sill.
• Aftermarket glass mismatch on prior repairs. We’ve seen Mr-Glass custom units where a previous contractor replaced broken glass with off-the-shelf laminated stock that didn’t match the original thickness. The window looks fine for a year, then edge stress cracks show up. We order glass matched to Mr-Glass’s original spec (thickness, tint, coatings) through our supplier network, or we use verified aftermarket glass that meets or exceeds the original rating when the OEM option is no longer available.

Our Mr-Glass Custom & Geometric Windows Process

Here’s how a Mr-Glass custom or geometric window job runs with us from the first call to the final walkthrough:

1. 1
   Call and schedule. You call (863) 264-3649, a live person answers, and we set a time that works for you. We’ll ask for the window dimensions and any photos you can text over so we show up prepared.
2. 2
   On-site diagnosis. A uniformed technician measures every opening twice, checks the frame for level and square, and identifies the exact failure point on your Mr-Glass unit. We don’t guess and we don’t quote over the phone on something we haven’t put eyes on.
3. 3
   Parts decision, laid out on paper. We source OEM Mr-Glass components when they’re available and still under a supplier warranty. When OEM isn’t available or the lead time is unreasonable, we offer aftermarket parts with the same or better rating, and we show you the difference in writing before we order anything.
4. 4
   The repair or replacement. For repairs, we do the work on-site whenever possible. For full replacements of custom shapes, we order the unit, remove the old window without tearing up the surrounding stucco or drywall more than necessary, and set the new one with proper shim placement and sealant work.
5. 5
   Test and verify. We run a water test on sealed units, cycle any operable vents through their full range, and check for binding, gaps, or air movement around the frame. If the pane is not true, the job is not done.
6. 6
   Cleanup and paperwork. We haul away the old unit and debris, sweep up, and register both warranty layers in writing before we leave your driveway. You get the paperwork, not a promise.

What Mr-Glass Custom & Geometric Windows Costs in Oakland Park

Straight numbers for what we typically see on Mr-Glass custom and geometric work in Oakland Park:

• Arch or radius window seal repair: $450-$750 per sash, depending on size and whether we rebuild one corner or both.
• Trapezoid or triangle operable vent hardware repair: $350-$650, including new pivot hardware and sash realignment.
• Full replacement of a custom geometric fixed window (up to 5ft. span): $1,200-$2,200 installed, depending on glass package (tempered, laminated, or impact-rated).
• Full replacement of an oversized Mr-Glass picture window (over 72 inches): $1,800-$2,800 installed, with impact-rated glass pushing toward the upper end.
• Match-replacement glass for a Mr-Glass custom unit (glass only, frame intact): $500-$1,100, depending on shape complexity and whether low-E or tint is required.

What moves the price: the shape itself (curved glass costs more to cut and set), whether the window is impact-rated, and whether the frame is still salvageable. We give free written estimates with line items, and the number on the quote is the number on the bill. Call (863) 264-3649 to schedule your free estimate.

Why Oakland Park Homeowners Call TruePane Windows & Doors for Mr-Glass Work

We’ve been doing window and door work in Oakland Park long enough to know which Mr-Glass models show up in which neighborhoods, and what the salt air and summer humidity do to them. Every job carries the Done Right Promise and The Keystone Standard: both manufacturer warranty layers registered in writing, durations stated, before our truck leaves your driveway. If it’s not right, we make it right, no paperwork fights. Our technicians are background-checked and uniformed, and they measure twice because getting a geometric window wrong by a quarter inch means ordering an entire new unit. And when a Mr-Glass unit can’t be saved, we’re authorized installers for PGT, CGI, CWS, and ES Windows, so we can show you side-by-side replacement options on paper and let you see exactly what you’re buying.

FAQs