Mr-Glass Shingle, Tile & Metal Roofing Nationwide | TruePane Windows & Doors

Mr-Glass Shingle, Tile & Metal Roofing in Oakland Park: What to Know First

We provide independent Mr-Glass shingle, tile and metal roofing in Oakland Park, with most repairs completed in a single visit. A typical Mr-Glass service call runs $175 to $450 for repair work, while full component replacements range from $600 to $2,400 depending on the line and what’s failed. We’re not the cheapest bid in Oakland Park, and we don’t try to be. If you own a Mr-Glass product and want it fixed right the first time, with both warranty layers registered in writing before our truck leaves your driveway, call (863) 264-3649. We’re an independent Mr-Glass service provider, not a factory-authorized shop, which means we answer to you, not to a manufacturer’s quota.

Call (863) 264-3649

How Mr-Glass Products Fail - and How We Fix Them

In Oakland Park, we see Mr-Glass products fail in patterns. Some are climate-driven, some are install-driven, some are simply the result of a product line that had a weak point from the factory. Here’s what actually shows up on our service calls.

• Shingle-line seal failure at the rake edges. Mr-Glass architectural shingle profiles, particularly the ones installed before 2016, tend to lose their adhesive strip at the rake edge first. Oakland Park’s afternoon thunderstorms soak that edge, the wind gets under it, and you get lifting. We re-secure the rake with a polymer adhesive rated for our humidity and re-nail where the deck is sound. A tube of caulk won’t fix this and it never has.
• Tile weep-channel clogging on the barrel profiles. Mr-Glass barrel tile collects debris in the weep channels exactly where Oakland Park’s live oaks drop leaves. When those channels clog, water backs up under the tile course and finds the underlayment. We don’t just clear the channel. We inspect the underlayment at the clog point, because by the time a homeowner notices a stained ceiling, the tile has been holding water for months.
• Metal roofing fastener back-out at the panel overlap. Mr-Glass standing-seam and metal panel lines use a neoprene washer on the exposed fastener. In Oakland Park’s sun, that washer bakes hard in about six or seven years, then water follows the fastener shank. We replace the fastener set with stainless and a fresh EPDM washer, not a hardware-store rubber one. The difference in lifespan is about a decade.
• Flashing detail failure at roof-to-wall transitions on tile installs. This is the one Dale Kessler talks about most. Mr-Glass tile installations from the mid-2000s often have step flashing that stops short of the wall plane by half an inch. Oakland Park’s wind-driven rain pushes water right into that gap. We pull the affected tile, run the flashing full-depth, and re-bed the tile. The tile looks fine from the ground. It never was.
• Underlayment delamination on low-slope shingle sections. Where a Mr-Glass shingle roof flattens out over a porch or carport, Oakland Park’s standing humidity keeps the underlayment damp enough to delaminate from the deck. By the time shingles start sliding, the deck is already soft. We don’t patch over delaminated underlayment. We cut it out, repair the deck if needed, and re-lay the section so it drains instead of ponding.

Our Mr-Glass Shingle, Tile & Metal Roofing Process

Every Mr-Glass job follows the same sequence, whether it’s a small repair or a full component replacement. No shortcuts, and no charging you to figure it out while we’re on the clock.

1. 1
   Call and diagnosis. You call (863) 264-3649, a live person answers, and we schedule a time. Our technician walks the roof, not a satellite photo. We find the actual failure, not the symptom.
2. 2
   Parts decision on paper. We show you OEM Mr-Glass parts and quality aftermarket equivalents side by side, with prices. On shingle and tile repairs, aftermarket underlayment and flashing are often better than what the factory shipped. On metal roofing fasteners, we use stainless regardless of what came out.
3. 3
   Warranty check before any work. We look at your Mr-Glass warranty documents. If a claim is worth filing, we tell you before we touch anything, because some warranties void if an independent shop works on the product first. We’ll never hide that from you.
4. 4
   The repair. Uniformed, background-checked technicians do the work. The repair is scoped, priced, and agreed to before we start. No change orders, no surprise line items.
5. 5
   Test and document. We water-test where it’s safe and practical, photograph everything, and register both warranty layers in writing before the truck leaves the driveway.
6. 6
   Cleanup. We leave your property the way we found it, minus the broken part. Scaffolding, tile fragments, old fasteners, all of it goes.

What Mr-Glass Shingle, Tile & Metal Roofing Costs in Oakland Park

Here are the numbers we quote most often in Oakland Park, honest ranges based on what we’ve actually billed, not what a national average says.

• Shingle rake-edge repair: $175-$325 per section, depending on linear feet and deck condition.
• Tile re-bed and flashing replacement: $400-$900 per wall transition or valley, depending on tile count and accessibility.
• Metal roofing fastener replacement: $250-$600 for a full panel run, including all washers and sealing.
• Underlayment section replacement on low-slope shingle: $600-$1,400, depending on deck repair and square footage.
• Full component replacement (tile field, metal panel section, or shingle plane): $1,200-$2,400, scoped and priced before any work begins.

What moves the price: roof pitch, single-story vs. two-story access, whether the deck is soft underneath, and whether the Mr-Glass warranty claim is still active. Call (863) 264-3649 for a free estimate with a written line-item quote. You’ll know the number before we pick up a tool.

Why Oakland Park Homeowners Call TruePane Windows & Doors for Mr-Glass Work

We’ve been serving local communities since 2008, and Dale Kessler founded this company in 2008 on a rule that still governs every job: if the pane is not true, the job is not done. For Mr-Glass shingle, tile and metal roofing in Oakland Park, that means we don’t band-aid a failed flashing detail and call it a day. We fix what actually went wrong, register both warranty layers in writing, and stand behind the work with our Done Right Promise. No paperwork fights. No arguing. If it’s not done right, we make it right.

We also work across other lines: PGT, CGI, CWS, and ES Windows. That matters when an Oakland Park homeowner has a mixed-brand house and wants one contractor who can diagnose the whole roof, not just the Mr-Glass section. And a live person answers our phone 24 hours a day, 7 days a week. Not a voicemail tree. Not a call center. A person who knows the difference between a shingle rake and a tile weep channel.

FAQs