Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Sliding glass doors
Impact garage doorsPGTCGI
Before
After
Before
After
Before
AfterSingle Hung Windows in Oakland Park, FL | TruePane Windows & Doors
Single hung windows are one of the most common impact-rated replacement profiles we install in Oakland Park homes. The design is simple and proven: a fixed upper sash that never moves, and a bottom sash that lifts open for ventilation. What makes ours different is the laminated impact glass and the way we set them. TruePane Windows & Doors installs single hung windows across our PGT, CGI, CWS, ES Windows, ECO, and Mr-Glass lines, all engineered to Florida’s High-Velocity Hurricane Zone requirements. If you’re replacing original windows in Oakland Park or planning a remodel, call (863) 264-3649 for a free on-site measurement and a written quote.
Product Overview - Single Hung Windows
A single hung window has one fixed upper sash and one operable lower sash. The bottom sash tilts or lifts for airflow, while the top stays sealed in place. That fixed top sash is why this profile performs so well in hurricane-prone construction: fewer moving parts means fewer points of failure under wind load. In Oakland Park, where every home sits in a High-Velocity Hurricane Zone, that matters.
We sell and install single hung impact windows in both aluminum and vinyl frames. The glass package is laminated impact glass with a PVB interlayer, the same type of construction used in automotive windshields. When a branch or other debris strikes the window, the glass may crack but it stays in the frame. That prevents wind-driven rain from entering the home and stops the sudden pressure change that blows roofs off houses. For many Oakland Park homeowners, single hung impact windows replace older non-impact units or builder-grade single pane windows that never met current Florida Building Code.
Architecturally, single hung windows work well across the housing stock we see in Oakland Park. They’re a natural fit for mid-century concrete block homes, ranch styles, and the newer Mediterranean-influenced builds going up around the city. The fixed upper sash keeps sightlines clean, and the operable lower sash keeps the profile familiar. We’ve installed these on everything from 1950s bungalows near Royal Palm Park to newer two-story homes off Andrews Avenue.
Technical Specifications
Every single hung window we sell in Oakland Park is ordered per home, per opening, and per wind zone. We don’t stock off-the-shelf units and hope they fit. Here’s what the product line includes:
- Frame materials: Aluminum or Vinyl. Aluminum is the traditional choice for coastal Florida, and we recommend it on most Oakland Park replacement jobs. Vinyl offers a lower-maintenance option with good thermal performance.
- Glass options: Laminated Impact Glass with a PVB Interlayer, Low-E Insulated Glass, Tinted Glass, and Clear Glass. The laminated impact layer is not optional on impact-rated units; other options are performance or aesthetic add-ons.
- Finish options: White, Almond, Bronze, Black, and Tan. These cover the major exterior paint palettes found in Oakland Park neighborhoods.
- Screen options: Half Screen or Full Screen, depending on how you use the window.
- Design pressure: Matched to your specific wind zone, up to +/-100, never higher. We don’t oversell a rating you don’t need, and we don’t under-spec a window that won’t pass your permit review.
- Compliance: Miami-Dade NOA and Florida Product Approval numbers available per configuration. We’ll provide the specific approval documents for your quote.
Hurricane & Compliance Performance
Laminated Impact Glass
The core of this window is a laminated glass package with a PVB (polyvinyl butyral) interlayer. On impact, the glass bonds to that interlayer and holds in the frame. That’s the function that keeps wind, water, and debris out of your Oakland Park home during a storm.
Miami-Dade NOA / Florida Product Approval
Every configuration we order carries a Miami-Dade Notice of Acceptance or Florida Product Approval number. These approvals are issued per configuration, meaning the exact window size, glass package, and frame combination you buy has been tested and documented. We verify the specific numbers on your quote before you sign anything.
FBC / High-Velocity Hurricane Zone Compliance
The single hung windows we install in Oakland Park are engineered to Florida Building Code (FBC) High-Velocity Hurricane Zone (HVHZ) requirements. HVHZ is the strictest wind-load standard in the state, and Oakland Park falls squarely within it. We won’t sell you a window that doesn’t meet it.
TAS 201 / TAS 202 / TAS 203 Testing Context
HVHZ-rated products are tested under a specific protocol family. TAS 201 covers large-missile impact, TAS 202 covers cyclic wind-pressure loading, and TAS 203 covers forced-entry resistance. These are the tests that prove a window holds up under repeated wind gusts after impact, not just a single hit.
Design Pressure Matched to Your Wind Zone
Design pressure tells you how much wind force a window is rated to resist. We match design pressures to your specific wind zone in Oakland Park, up to +/-100, never higher. Over-specifying a window means paying for performance you don’t need. Under-specifying means a failed permit. We’ll get it right.
Energy Performance Options
For homes where cooling costs matter, we can configure single hung windows with Low-E insulated glass. The Low-E coating reflects a meaningful portion of solar heat gain, which is exactly the right direction to push energy performance on a South Florida window. Tinted glass is also available for glare-heavy exposures.
Color & Glass Options
The five finish options we offer on single hung windows, White, Almond, Bronze, Black, and Tan, map closely to what we actually see in Oakland Park. White is the workhorse for coastal-inspired homes and older Florida ranches. Almond works well on homes with softer stucco tones like the Mediterranean-style builds around the city. Bronze and Black have become the default on newer and remodeled properties with dark trim packages. Tan shows up frequently on oak-shaded neighborhoods where a warmer neutral keeps the exterior from feeling stark.
On glass, the base specification is clear laminated impact glass. If you want heat control, Low-E insulated glass is the upgrade we recommend most often in Oakland Park, where the summer sun runs long and hard on east- and west-facing walls. Tinted glass can cut glare in rooms that get heavy afternoon sun. You’ll make these choices during the quote process, and we’ll help you match each opening to its exposure.
Installation by TruePane Windows & Doors in Oakland Park
An impact window is only as good as the opening it’s set in. A Miami-Dade NOA-listed window loses its rating when it’s installed sloppy. We see it in Oakland Park regularly: impact windows installed by crews that rushed the perimeter seal or shimmed the frame out of square. The window looks fine until a storm loads it, and then the weak point isn’t the glass, it’s the installation.
Our install process starts with a pre-install inspection of every opening. We check the existing frame, look for rot or termite damage in wood rough openings, and verify that the rough opening is sized for the new unit before we order. On install day, we set every frame level, plumb, and square. That’s not optional. A window set even slightly out of square will bind on the sash and fail the air and water performance you paid for.
We follow AAMA 2400/2410 installation practice and use AAMA 812 low-expansion foam perimeter sealant around every frame. That foam is the air and water barrier between the buck and the frame, and in Oakland Park’s humidity and afternoon thunderstorms, it’s the detail that prevents slow leaks you don’t notice until the drywall stains.
After installation, we run a final water test on the openings, clean the job site, and walk you through the window operation. For Oakland Park specifically, we also flag permitting requirements. Oakland Park sits in a High-Velocity Hurricane Zone, and your permit submittal needs the correct NOA or Florida Product Approval documentation for every window on the order. We provide those documents. If your job requires an engineered submittal, we coordinate it before installation so you’re not stuck at the permit counter.
Frequently Asked Questions - Single Hung Windows
We match each window’s design pressure to the specific wind zone of your property in Oakland Park, up to +/-100. That means we don’t sell a generic rating. Your quote will state the exact design pressure for your opening, and we’ll provide the corresponding Miami-Dade NOA or Florida Product Approval documentation for permit submittal. Call (863) 264-3649 and we’ll pull the wind zone for your address.
Lead time depends on the manufacturer and glass configuration, but most single hung impact windows we order for Oakland Park homes take a few weeks from order confirmation to arrival at our shop. We’ll confirm the current lead time when we quote your project, and we’ll schedule installation once the windows are physically in hand. Call (863) 264-3649 for a current estimate.
Yes. Oakland Park permitting requires documentation that your windows meet High-Velocity Hurricane Zone standards. We provide the Miami-Dade NOA or Florida Product Approval numbers for your specific configuration with your quote, and we can supply the submittal package your permit application needs. Call (863) 264-3649 and we’ll explain what your project requires.
Yes, within the tested and approved size ranges for the product line. Single hung impact windows are ordered per opening, so we can accommodate unusual rough opening sizes as long as the configuration falls within the manufacturer’s approved limits and carries a valid NOA or Florida Product Approval. We’ll verify that before you buy.
For aluminum frames, rinse the tracks periodically and keep the weep holes clear so water drains the way the frame was designed to. Vinyl frames need the same simple care. The glass can be cleaned with mild soap and water. Avoid petroleum-based cleaners on any gaskets or seals. If you notice the lower sash getting stiff, call us before you force it; that’s usually a track or balance issue, not a reason to replace the window.
Get a Quote - Single Hung Windows in Oakland Park
If you’re pricing single hung impact windows for an Oakland Park home, start with a free on-site measurement. We’ll measure every opening, check the wind zone, price the exact configurations, and give you a written line-item quote. Call (863) 264-3649 to schedule yours.
Written by the team at TruePane Windows & Doors, serving Oakland Park homes with Florida-approved impact windows and professional installation.
Six Reasons Homeowners Choose TruePane Windows & Doors
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.
Other TruePane Windows & Doors Services
What Neighbors Say About TruePane Windows & Doors
Detailed Images
