Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Impact Entry & French Doors in Oakland Park, FL
Replacing standard entry or French doors with impact-rated units in Oakland Park typically requires an investment of $3,200 to $8,500 per opening, depending on the material, glass configuration, and specific structural requirements of your home. At TruePane Windows & Doors, our Impact Windows & Doors services specialize in these high-performance systems designed to withstand the unique pressure requirements of Broward County, ensuring your home remains secure during hurricane season and protected from forced entry year-round. If your current doors are binding, showing signs of seal failure, or simply lack the impact rating required for modern safety codes, give us a call at (863) 264-3649 for a precise, written estimate.
We approach every installation as a craft commitment, rooted in years of local service. When you choose us for your impact windows and doors in Oakland Park, you are not getting a cookie-cutter installation. You are getting the benefit of our experience with local building codes, from the specific wind-load requirements in neighborhoods near the coast to the structural nuances of older homes in the interior of Oakland Park. We are proud to be an authorized installer for premium lines like, allowing us to provide side-by-side comparisons on paper so you know exactly what you are paying for before we start.
Our founding rule, established by Dale Kessler in 2008, remains our north star: if the pane is not true, the job is not done. This philosophy guides how we handle every entry and French door install. We don’t just swap out the frame and walk away. We ensure the threshold is properly flashed to prevent water intrusion, the hardware is aligned for smooth operation, and both manufacturer warranty layers are registered in writing before our truck leaves your driveway. This is part of The Keystone Standard, our promise that the work is done right the first time, backed by our Done Right Promise.
When You Need Impact Entry & French Doors
Many homeowners in Oakland Park assume their doors are secure simply because they are made of wood or metal. However, impact resistance is about the entire system-the frame, the locking mechanism, and the laminated glass. If you notice any of the following, it is time to have a professional evaluate your entry points:
- The door binds or drags in the heat: Florida humidity causes frames to swell. If your French doors are difficult to open or close during the summer months, the structural integrity of the seal is likely compromised, allowing air and potential debris to penetrate.
- Fogging between glass panes: If you see moisture or condensation inside the glass of your French doors, the insulated seal has failed. This is not just an efficiency issue; it is a sign that the vacuum seal is gone and the glass is no longer performing as a coherent impact-rated unit.
- Visible rot or warping at the threshold: Oakland Park homes near the canals or older, shaded lots often deal with excess moisture. If the wood at the bottom of your door frame is soft or crumbling, the door cannot be properly anchored against high winds, which is a major safety risk.
- Outdated or non-impact glass: If your home was built before modern impact codes were strictly enforced, your current glass may shatter upon impact. We frequently replace standard glass doors that provide zero protection against wind-borne debris, which is a critical vulnerability during hurricane season.
- Difficulty locking or latching: If you have to lift or shove your door to get the deadbolt to engage, the door is out of square. An improperly aligned door will not distribute the force of an impact correctly, making it the weakest point in your home’s envelope.
We encourage homeowners to address these issues early. A door that is difficult to operate today can become a door that refuses to close when a storm warning is issued. We are available to inspect your home and provide an honest assessment of whether a repair is viable or if a full replacement is necessary for your safety.
Our Impact Entry & French Doors Process
We do not believe in surprise line items or changing the scope of work halfway through a project. Our process is designed to be transparent, predictable, and clean, ensuring that your home is respected throughout the installation. Here is how we manage an Impact Garage Doors or entry door replacement:
- Initial Assessment and Measurement: We start by sending a background-checked, uniformed technician to your home. We measure every opening twice to ensure the new door unit fits the existing rough opening precisely. We look for signs of structural rot or hidden damage that might affect the installation.
- Side-by-Side Quote Presentation: We don’t hide behind brochures. We sit down with you and present paper quotes for different manufacturer lines, such as Pella or ViewLux. We explain the difference in performance, warranty coverage, and aesthetics so you can make an informed choice based on your specific needs.
- Warranty Registration: Before we even schedule the install, we verify the warranty requirements. Under The Keystone Standard, we register both manufacturer warranty layers in writing. You will have documentation in your hand before we ever touch a tool, ensuring there are no paperwork fights later.
- Precision Installation: Our team removes the old unit with care to protect your interior finishes. We install the new impact door, ensuring it is plumb, level, and square. We use high-grade sealants and flashings appropriate for the Oakland Park climate to prevent water intrusion, which is the most common cause of future door failure.
- Final Verification and Clean-Up: Once installed, we test the operation of the door and the locking mechanism. We clean the area thoroughly, removing all old materials and debris. We walk you through the operation of the new hardware and verify that you understand your maintenance responsibilities.
Impact Entry & French Doors Pricing in Oakland Park
Pricing for impact doors is rarely a flat rate because every home in Oakland Park has different structural requirements and Wind Mitigation & Code Compliance needs. Factors like the size of the opening, the hardware finish, the glass package (which affects energy efficiency and light transmission), and the complexity of the installation dictate the final cost. We provide upfront, transparent pricing so you never have to guess what the final bill will be.
| Door Type | Estimated Investment Range |
|---|---|
| Standard Impact Entry Door (Single) | $3,200 - $5,400 |
| Impact French Door System (Double) | $5,800 - $9,200 |
| Custom Sidelite/Transom Add-ons | $1,200 - $2,800 |
| Hardware & Security Upgrades | $400 - $900 |
Please note that these ranges include professional removal, disposal of the old door, and certified installation. We offer free estimates for all residential projects. If you are concerned about cost, remember that we offer a permanent 5% discount for seniors and veterans, and we have free, written repair estimates. Give us a call at (863) 264-3649 to discuss your specific door needs.
FAQs - Impact Entry & French Doors
How much does it cost to replace a French door in Oakland Park?
Replacing a standard impact-rated French door or Impact Sliding Glass Doors system in Oakland Park generally costs between $5,800 and $9,200, depending on the manufacturer and the specific glass package you choose. This price covers the removal of the old unit, the installation of the new impact-rated system, and the registration of your warranties. Call (863) 264-3649 for an exact, written quote tailored to your home’s measurements.
Is it cheaper to repair a door or replace it entirely?
If your door has suffered seal failure or basic hardware wear, a repair is often the more economical choice, and we offer a maintenance check to keep existing doors operating correctly. However, if the frame is rotting, the door is significantly out of square, or the glass is not impact-rated, replacement is almost always the better long-term investment. We will always prioritize a repair if it is safe and effective, but we will be honest if replacement is the only way to ensure your home is secure. Call us today for an assessment.
Can you match my existing door style?
We work with over a dozen manufacturers, including Andersen and Marvin, which allows us to match almost any architectural style, from historic Florida homes to modern builds. Because we are authorized installers for so many lines, we can source doors that replicate the look of your original wood or metal doors while providing the modern safety of impact-rated glass. We bring catalogs and samples to your home so you can see the finish and texture before you decide.
How long does the installation take?
Most single-opening door installations are completed in a single visit, typically within one day. We arrive with the materials, tools, and the team needed to finish the job without leaving your home exposed overnight. Our goal is to minimize the disruption to your routine while ensuring the installation meets our strict Keystone Standard. If you have a larger project with multiple openings, we will provide a clear timeline upfront so you know exactly when to expect us.
Every job we perform is guided by the principle that if the pane is not true, the job is not done. Whether you are looking to upgrade your home’s security, improve its energy efficiency, or simply replace a door that has reached the end of its life, we are here to help. We are a locally-rooted company that plans to be in Oakland Park for another years, so we have every incentive to get your job done right the first time. Reach out to the team at TruePane Windows & Doors at (863) 264-3649 to schedule your free estimate.
Written by Dale Kessler, Owner at TruePane Windows & Doors, serving Oakland Park.
Six Reasons Homeowners Choose TruePane Windows & Doors
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.



Before
After
Before
After
Before
After