CGI Windows & Doors in Fort Lauderdale, FL

CGI Windows & Doors in Fort Lauderdale, FL | TruePane Windows & Doors

We provide independent CGI window and door service throughout Fort Lauderdale, from seal replacements on Estate fixed units to full hardware swaps on Targa Series doors. The one thing that separates our CGI work here is knowing which failure patterns repeat in this city’s canal-salt air and which repairs keep your home’s HVHZ compliance intact. Call (863) 264-3649 and we’ll tell you straight whether your CGI unit is worth repairing or should be replaced. That conversation starts with a free estimate, not a sales script.

Why Fort Lauderdale Residents Choose Us for CGI Service

Dale Kessler grew up off Prospect Road in Oakland Park, back when half the houses still had original jalousie windows. He went through the building construction program at McFatter Technical College in Davie, then spent years as a glazier’s helper and lead installer across Broward County before founding TruePane in 2008. That background means we look at a CGI window the way a finish carpenter’s son looks at a reveal: we see the gap between what looks finished and what is finished.

We’re an independent service provider, not a CGI factory outlet. That independence is a feature, not a disclaimer. We order from CGI-approved distributors and carry what Fort Lauderdale homes actually need: stainless rollers, 316 stainless hardware, and Schlegel weatherstripping rated for salt-air exposure. If your CGI window or door is still under structural warranty, we’ll tell you to go through the manufacturer for replacement sashes or glass packs. If it isn’t, we’ll source parts that meet or exceed original specs. We’ve been doing CGI sales & service long enough to know the difference between a repair that lasts and one that buys you eighteen months.

Common CGI Windows & Doors Problems We Solve in Fort Lauderdale

Here’s what we see week after week on CGI units across the city. Not every problem is a Fort Lauderdale problem, but most of them are made worse by the salt, humidity, and settling that come with this terrain.

• NOA label delamination on CGI Sentinel frames. This one is almost exclusive to canal-side and salt-air neighborhoods. The Miami-Dade Notice of Acceptance label peels or fades, and suddenly a wind-mitigation inspection flags the window even though the frame itself is sound. We photograph the label, clean the surface, and seal it under clear UV-resistant film so the next inspection passes.
• Roller and track wear on CGI 900 Series sliding glass doors. In older CBS homes, concrete block settling leaves rough openings slightly out of level. That puts constant shear on the bottom track. We see chewed-up rollers and grooved tracks in Coral Ridge and Lauderdale Isles regularly. Usually it’s a roller replacement and track clean-up; sometimes it’s a re-shim.
• Failed argon seals in CGI Estate fixed units. Fort Lauderdale’s humidity runs above 70% most of the year, and the UV is relentless. Non-impact IGUs and even some impact units lose their seal faster here than in central Florida. A fogged picture window is often a glass-pack replacement, not a full-frame job.
• Corroded hinge screws on CGI Targa Series out-swing doors. When the original installer reused zinc fasteners instead of stainless, the screws corrode within two or three seasons near the canals. We swap them for 316 stainless and replace the weatherstripping while we’re at it.
• Binding or sagging panels on impact French doors. Humidity cycles cause wood and composite frames to move. A door that closes fine in February binds in August. Often it’s a hinge adjustment; occasionally it’s a frame re-shim. We measure twice before we touch anything.

CGI Service in Fort Lauderdale: What Local Conditions Mean for Your Equipment

Here’s the part most generic window pages never mention. Fort Lauderdale sits entirely inside Broward County’s High-Velocity Hurricane Zone, one of only two counties in the U.S. where every replacement window and door, no matter how far inland, must carry a Miami-Dade Notice of Acceptance or an approved Florida Product Approval. That is not a suggestion. A home ten miles from the beach in Coral Ridge or Lauderdale Isles falls under the same requirement as a condo on the sand in Seven Isles.

The practical consequence for CGI owners is specific. We routinely see homeowners with structurally sound frames fail re-roof inspections because the original NOA label has peeled or faded from canal-salt exposure. The window works. The seal is intact. But the inspector can’t verify the product certification, and the whole roof job stalls. That’s a Fort Lauderdale problem. A contractor running the same CGI repair in Orlando never sees it, because Orlando isn’t in an HVHZ county and the salt-air corrosion cycle doesn’t reach inland homes the same way. When we service a CGI window here, verifying and preserving that NOA label is part of the job, not an add-on. Our crew replaced six corroded hinge screws and a failed bottom roller on a CGI Targa Series door on a canal-front home in Seven Isles last spring. The original installer had used zinc fasteners. We put in 316 stainless hardware and a Schlegel weatherstrip, then re-verified the NOA label, which had delaminated from salt mist. We photographed the intact label, cleaned it, and sealed it under clear UV-resistant film before leaving. The next wind-mitigation inspection passed. That sequence of work is what CGI service in Fort Lauderdale actually looks like when it’s done right.

CGI Models & Products We Service in Fort Lauderdale

We work on the full CGI residential line: Sentinel Series impact windows, Estate Collection impact windows, Targa Series impact doors, and 900 Series sliding glass doors. Each model has its own failure patterns in this climate, and we’ve seen all of them enough to quote a repair accurately over the phone most of the time.

Parts approach matters. If a CGI window or door is still under structural warranty, we recommend going through the manufacturer for replacement sashes or glass packs. You paid for that warranty; use it. If the unit is out of warranty, we source quality aftermarket components that hold up in salt air: stainless rollers, brass or 316 stainless hardware, and Schlegel weatherstripping. We don’t install zinc fasteners on canal-front homes, and we don’t put bare aluminum sills back on waterway-facing doors. That hardware oxidizes visibly within two to three seasons here, and it’s an easy thing to get right the first time.

CGI Service Pricing in Fort Lauderdale

FAQs - CGI Windows & Doors in Fort Lauderdale

Can you save my CGI Estate picture window with a failed seal on a canal-front home in Rio Vista, or does salt-air humidity make repair a waste?

It depends on the frame, not the seal. If the frame retains its original NOA certification and the aluminum or vinyl is structurally sound, a failed seal is repairable with a glass-pack replacement. The salt air shortens seal life, but it doesn’t necessarily destroy the frame. What kills a repair is frame corrosion or an unreadable NOA label. We’ll assess both before recommending anything. Call (863) 264-3649 for an exact quote.

My CGI 900 Series sliding door is getting hard to open in my 1960s Coral Ridge CBS home - is this a roller issue or something worse?

Usually it’s rollers first. CBS homes settle over decades, and an out-of-level rough opening puts constant shear on the bottom track. We frequently replace worn rollers and re-shim the track in these 1950s and 1960s block homes. The time to worry is if the frame itself has shifted or the track is grooved through. We’ll know within fifteen minutes of looking at it. Estimates are free.

Will replacing only the glass in my CGI Sentinel casement window keep my HVHZ compliance?

If the original frame retains its current NOA and we’re replacing the glass pack with a compliant unit, yes. The compliance lives in the total assembly, not just the glass. But if the NOA label has peeled or the frame has corroded, a glass-only fix won’t get you through a wind-mitigation inspection. We verify that before touching the glass. Call (863) 264-3649 and we’ll walk you through it.

Do CGI windows in Fort Lauderdale need stronger corrosion protection than the same model installed in Orlando?

Yes. Fort Lauderdale’s 300-plus miles of inland canals push salt-laden air deep into residential neighborhoods far from the beach. Homes in Rio Vista, Seven Isles, and Coral Ridge Isles see hardware and frame corrosion comparable to oceanfront properties. Hardware that lasts fifteen years in Orlando can fail in seven here. We spec 316 stainless and anodized or vinyl-clad components as standard on canal-facing work, not as an upsell.

Can you repair a CGI Targa Series French door that was originally installed with zinc hinges near Wilton Drive without triggering a full HVHZ re-inspection?

In most cases, yes. Hinge hardware swaps and weatherstripping replacements don’t trigger a re-inspection requirement for the door assembly, as long as we aren’t altering the frame or changing the product’s structural assembly. We repair, re-verify the NOA label, and photograph the work. The county cares whether the assembly remains compliant, not whether a hinge screw was replaced. Call (863) 264-3649 if you want us to look at the door.

Service Areas Near Fort Lauderdale

We run CGI service throughout Greater Fort Lauderdale and the surrounding cities. You’ll see our trucks in Fort Lauderdale service area neighborhoods like Rio Vista and Coral Ridge, plus CGI service in Wilton Manors along Wilton Drive, CGI service in Oakland Park near Prospect Road, and Lauderdale-by-the-Sea and Lauderhill. Wherever you are, we’ll bring the same parts and the same standard.

Book Your CGI Service in Fort Lauderdale Today

If your CGI window or door is showing salt-air damage, a binding track, or a failed seal, call us before the next inspection turns it into a problem you can’t defer. (863) 264-3649 puts you on the phone with a live person, not a callback queue. We’ll schedule a free estimate, measure twice, and quote the repair in writing. If the pane is not true, the job is not done. That’s the standard we work to on every CGI unit in Fort Lauderdale.

Written by Dale Kessler, Owner at TruePane Windows & Doors, offering Fort Lauderdale Door Installation since 2008.