Simonton Sliding & Patio Doors Nationwide | TruePane Windows & Doors

Simonton Sliding & Patio Doors: The Oakland Park Owner’s Guide

We stock and install Simonton-compatible sliding and patio door parts throughout Oakland Park, with most roller, handle, and lock replacements completed in a single visit. Installed pricing typically runs $165 to $480 depending on the part and your door’s series, and our trucks carry the most common Simonton hardware so we’re not making you wait on a backorder. Most Oakland Park homeowners discover the problem the same way: the door starts dragging across the track, the handle stops catching, or the lock won’t throw on a humid morning when the aluminum has swelled just enough to throw everything out of alignment.

Call (863) 264-3649

Simonton builds a solid door, but Florida humidity and salt air are hard on hardware. Rollers flatten, handles strip, and locks corrode from the inside out. If you’re in Oakland Park and your Simonton door is fighting you, here’s what you need to know before you spend a dollar.

Which Simonton Models This Applies To

Simonton has produced several sliding patio door lines over the years, and the hardware is not interchangeable between all of them. The series you have determines which rollers, handles, and locks will actually fit. The most common lines we see in Oakland Park homes are the Reflections 5500 and 6500 series, along with the older ProFinish and StormBreaker models from the 1990s and early 2000s. Each series has its own roller housing dimensions and handle screw spacing.

Here’s the compatibility gotcha that catches people: Simonton changed roller designs between the 5500 and 6500 series, and the two look nearly identical at a glance. The 5500 uses a 1-1/4 inch convex roller wheel while the 6500 uses a 1-1/2 inch flat roller. If you buy the wrong one, the door will sit too high or too low in the track and the lock won’t line up with its strike plate. We measure the wheel diameter and the housing width before quoting any part.

To identify your door’s series, look for a small silver or white label on the inside edge of the door panel, near the handle or at the bottom rail. If the label is gone, which happens often after years of cleaning and sun exposure, measure the visible glass and the frame thickness. A 5/8 inch frame with a rolled screen track usually points to the older lines. We carry OEM Simonton parts where they’re still available, and quality aftermarket equivalents for discontinued series, and I’ll tell you which is which before we install anything.

TruePane Windows & Doors is an independent service provider and not affiliated with Simonton. We also stock parts for Andersen, and Pella doors, which helps when a homeowner has mixed brands across the house.

Signs Your Simonton Sliding & Patio Doors Is Failing

• The door drags or you have to lift it to slide it. This almost always means the rollers are worn flat or the bearings have seized. Oakland Park’s humidity accelerates the corrosion, and once a roller flattens, it starts gouging the track, which turns a $40 roller job into a track replacement.
• The handle flops loose or fails to engage the latch. Simonton handles use an internal spring and gear mechanism that strips after years of use. The handle will feel spongy, then stop throwing the latch entirely. It’s not an adjustment issue; the internal mechanism is done.
• The lock won’t throw or the key turns without resistance. Salt air and humidity corrode the lock cylinder from the inside. By the time an Oakland Park homeowner notices roughness in the key turn, the cylinder is usually pitted beyond repair and needs replacement, not lubrication.
• You see a visible gap at the top or bottom of the door panel when closed. This means the rollers have collapsed or the frame has settled out of square. In Oakland Park’s older homes, especially near the water, slab settlement shifts door frames and leaves a gap that lets conditioned air out and bugs in.
• Water stains appear on the interior floor after heavy rain. The weatherstripping along the bottom rail has compressed or torn, and the weep holes in the track may be clogged. Simonton doors rely on those weep holes to drain water out through the track; once they clog, water backs up and finds its way inside.

Replacement Cost & What’s Included

Here’s where Oakland Park pricing lands for Simonton sliding and patio door hardware, installed:

• Roller replacement (pair): $165 to $240, depending on series and whether the track needs cleaning or minor dressing.
• Handle and latch assembly: $185 to $320, depending on whether it’s a standard white handle or a keyed locking handle in bronze or nickel finish.
• Lock cylinder replacement: $120 to $195, including rekeying to match your existing key if the cylinder is salvageable.
• Track replacement: $340 to $690, for extruded aluminum tracks on wider openings; most Oakland Park repairs don’t require this unless the track is deeply gouged.
• Full weatherstripping and seal replacement: $140 to $260, including the bottom rail sweep, side jamb seals, and weep hole cleaning.

Every quote is line-item: the part, the labor, and the warranty, on paper before any work starts. There are no change orders and no surprise charges added after the fact. Our workmanship is covered by the Done Right Promise, and when manufacturer warranties apply, we register both layers in writing under The Keystone Standard before the truck leaves your driveway. We don’t leave warranty registration to chance, and we don’t leave you to fight the manufacturer alone if something fails.

DIY or Call Us?

A homeowner can safely check a few things before calling: confirm the door’s series from the label if it’s still attached, measure the roller wheel diameter if you can see it from underneath, and note whether the handle is loose at the screws or internally stripped. That information helps us quote more accurately over the phone.

What I’d caution against is pulling the door panel out of the track to replace rollers yourself. A Simonton sliding panel is heavy, and once you lift it out, you’re dealing with a panel that weighs enough to injure you and glass that will not forgive a drop. We adjust older doors by removing the panel, replacing the rollers, and realigning the track, all of which requires the right tools and two people on larger panels. We’ve had Oakland Park homeowners call us after a DIY attempt that ended with the door on the ground and a cracked corner. The panel repairs cost more than the roller job would have.

If the door is dragging, binding, or not locking, call us at (863) 264-3649. We’ll tell you what we think over the phone and schedule a free estimate.

FAQs