Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Sliding glass doors
Impact garage doorsPGTCGI
Before
After
Before
After
Before
AfterCGI Window Installation in Oakland Park: What to Know First
CGI window installation in Oakland Park typically runs $900 to $2,800 per opening depending on the series, size, and whether we’re replacing an existing CGI unit or setting a new one into a rough opening that needs correction. We are an independent CGI service provider, not a factory rep, and most CGI installs in Oakland Park take one to two days once the windows are on the truck. If you own a CGI window that was installed years ago and it’s now binding, leaking, or fogging, this page tells you what’s actually going on and what it costs to fix it right. Call (863) 264-3649 and a live person answers, day or night.
How CGI Products Fail - and How We Fix Them
CGI builds a solid window, but every product line has its weak points. Here’s what we see in Oakland Park, working on CGI windows that were installed anywhere from five to thirty years ago.
- Estate Collection casement sash sag. The Estate casement uses a heavy extruded aluminum sash with a multi-point lock. Over time, the hinge side wears and the sash drops a few millimeters, so the lock points no longer line up with the keepers. The window still closes, but it doesn’t seal, and the homeowner feels a draft and sees daylight at the meeting rail. Our fix is re-squaring the sash with new friction hinges spec’d for the sash weight, then re-anchoring the keepers so every lock point engages. We don’t shim it and call it good.
- Sentinel Series sliding window roller collapse. Sentinel sliders ride on nylon rollers in a bottom track that collects sand and grit, which Oakland Park has plenty of. Once a roller binds, the panel drags, the track gouges, and the homeowner starts using two hands and a hip to move the window. That’s when the glass gets stressed at the corners. We replace the roller assembly with the correct load rating, clean and re-lube the track, and inspect the corner welds before we call it done.
- Fogged or failed insulated glass units (IGUs). CGI’s impact glass is laminated, but the air space still relies on a perimeter seal and spacer. When that seal fails, condensation shows up between the panes, and no amount of wiping helps. The fix isn’t replacing the whole window unless the frame is damaged. We measure the opening, order an IGU with the correct glass makeup and spacer material, and set it into the existing frame. It matters who does this: an IGU that’s even slightly out of plane will put pressure on the frame and shorten the life of the new unit.
- Awning window operator stripping on the Aria line. The Aria awning uses a scissor-style operator with a worm gear. The gear is softer than the crank spindle, so it strips before the crank does. A homeowner will feel the crank slip near the top of the throw and assume the window is broken. We replace the operator with the correct swing ratio, not whatever looks close at the supply house. A mismatched operator changes the final closing pressure and compromises the weather seal.
- Improper flashing on retrofit installs. This isn’t a CGI defect; it’s an installation defect, and it’s the most common one we correct in Oakland Park. Contractors who set the window but didn’t flash the rough opening correctly leave the jamb exposed to every afternoon thunderstorm that rolls through in August. The symptom is water staining at the sill corners and mold on the interior returns. We pull the trim, correct the flashing with peel-and-stick membrane and proper sill pan details, re-bed the window, and re-trim.
Our CGI Window Installation Process
Here’s how a typical CGI window installation goes when we’re called in, whether it’s a single replacement or a whole elevation.
- 1
The call and the look. You call (863) 264-3649, tell us what’s happening, and we schedule a visit. Dale Kessler grew up off Prospect Road in Oakland Park, so he knows these houses and how they were built. We show up when we say, in uniform, and we listen before we talk.
- 2
Measure and diagnose. Every opening gets measured twice. If the window is binding, sagging, or leaking, we find the cause before we quote a fix. If the frame is salvageable, we don’t sell you a replacement you don’t need.
- 3
Parts decision on the table, in writing. Where CGI’s published specs call for OEM components to keep the warranty intact, we use them. Where a quality aftermarket part matches or exceeds the original and won’t void coverage, we tell you and quote both options side by side. You see exactly what you’re paying for.
- 4
Rough opening corrected before the new unit goes in. If the opening is out of square or the flashing is failing, we fix that first. A new window set into a bad opening is a callback waiting to happen.
- 5
Set, seal, and test. We bed the window in sealant, anchor it per code and manufacturer spec, trim it out, and then operate it through its full cycle. The panel has to open and close with one hand, every lock point has to engage, and the seal has to seat evenly. If it’s not sealed right, it’s not done.
- 6
Warranty registration before we leave. Both warranty layers get registered in writing before the truck leaves your driveway. You get the durations in writing. That’s The Keystone Standard, and it’s not optional on any CGI job we install.
What CGI Window Installation Costs in Oakland Park
Straight numbers, no mystery pricing. Here’s what CGI work runs in this market:
- IGU replacement in an existing CGI frame: $350 to $850 per unit, depending on glass size, tint, and whether it’s a laminated impact panel.
- Casement or awning window replacement: $1,100 to $2,400 per opening, installed, flashed, and trimmed.
- Fixed or picture window replacement: $900 to $2,000 per opening, depending on square footage and whether tempered glass is required.
- Sliding window replacement: $1,100 to $2,300 per opening.
- Bay or bow assembly (full rebuild): $4,500 to $9,000 depending on projection, depth, and roof details.
What moves the price: whether the rough opening needs correction, whether structural mullions are involved, and whether the opening is an unusual size that requires a custom unit. We quote line-item pricing up front, and the number we give you is the number on the final bill. Call (863) 264-3649 for a free estimate, and talk to a person who can answer your questions on the first call.
Why Oakland Park Homeowners Call TruePane Windows & Doors for CGI Work
We’ve been doing window and door work in Oakland Park for the better part of two decades, and Dale Kessler grew up here, so we’re not a franchise that showed up last spring. Homeowners call us after a previous contractor left them with a CGI window that fogs or binds, because they want it corrected without a paperwork fight. Every job is covered by our Done Right Promise: if it’s not done right, we make it right, no arguing. We’re also an authorized installer for, and PGT, so if a CGI repair doesn’t make sense and replacement with another line does, we can quote both options on paper side by side. A live person answers our phone 24 hours a day. We’ll be there when we say.
Frequently Asked Questions
Warranty coverage depends on using components that meet CGI’s published specifications and documenting the installation correctly. We install CGI products to manufacturer spec, register both warranty layers in writing before leaving the job, and give you the durations on paper. Call (863) 264-3649 if you have a specific warranty question about your CGI unit.
Most single-unit CGI replacements take one day from removal to trim-out. Larger jobs, like a full elevation or a bay assembly, run two to three days depending on rough opening corrections. We schedule for the day when the windows are in our possession, so you’re never waiting on a truck that might show up.
If the frame is square, the hardware is sound, and only the insulated glass unit has failed, an IGU replacement costs roughly half of a full window replacement. If the frame shows corrosion, the welds are stressed, or the opening has water damage behind the trim, replacement is the better long-term call. We’ll tell you which one applies to your window and quote both numbers so you can decide.
Yes. Most of the CGI work we handle in Oakland Park is corrective: windows installed years ago by companies that are no longer answering the phone. We re-set, re-flash, re-seal, and replace hardware without requiring you to rip out a window that still has life in it.
It depends on parts. Common CGI hardware is typically in stock or available within a week. Custom-sized glass units run two to three weeks from order to delivery. We give you a firm schedule and stick to it. Call (863) 264-3649 and we’ll tell you the lead time for your specific window on the spot.
Written by Dale Kessler, Owner, TruePane Windows & Doors at TruePane Windows & Doors, serving Oakland Park and nearby areas.
Six Reasons Homeowners Choose TruePane Windows & Doors
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.