Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
VLX 500 Sliding Window in Oakland Park, FL | TruePane Windows & Doors
The VLX 500 Sliding Window is a high-performance aluminum sliding system built for Florida living. Slim sightlines, a glide action that feels nearly weightless, and track options that adapt to wide openings or tighter spaces. It’s the window homeowners in Oakland Park choose when they want clean horizontal lines, serious durability against coastal humidity, and glass performance that actually lowers cooling costs. TruePane Windows & Doors is an authorized installation partner for ViewLux, which means you get the product at full warranty strength and an install crew that knows how to seal it correctly for South Florida weather. Call (863) 264-3649 to talk specs or schedule a free measurement.
Product Overview - VLX 500 Sliding Window
The VLX 500 is built around two ideas that don’t usually live in the same frame: strength and subtlety. The aluminum profile measures just 1.97 inches wide, so when you look through the window, you see the view, not the frame. Wall thickness comes in at 0.079 inches, which gives the extrusion real structural integrity without adding visual bulk. The result is a window that holds its shape in a 20-story condo or a single-story ranch home in Oakland Park, and keeps sliding smoothly after years of daily use.
Homeowners pick the VLX 500 for a few reasons. Some are replacing old single-pane sliders and want something that won’t fog, whistle, or stick when the humidity climbs. Others are building new and want the horizontal, modern look that pairs well with flat roofs and clean stucco lines you see throughout Broward County. The series comes in 2-track and 3-track configurations, so it works as a straightforward two-panel slider or as a multi-panel opening for a wide lanai or living room wall. Fiberglass rollers and a precision-machined track keep the panels moving with two fingers of pressure, even with a 60-pound laminated glass panel loaded in.
Aluminum gets a bad reputation in Florida because older frames absorbed heat. The VLX 500 addresses that directly with a polyamide thermal break that separates the interior and exterior aluminum. That break is the difference between a frame that radiates afternoon heat into your living room and one that stays close to room temperature. We’ll cover the energy performance in more detail below, but the short version is this: the engineering here is designed for tropical and subtropical climates, not adapted to them.
Technical Specifications
- Frame material: High-grade extruded aluminum, 0.079″ wall thickness
- Profile width: 1.97″ visible frame width for maximum glass area
- Track configurations: 2-Track (two panels, one fixed) and 3-Track (multi-panel for wider openings)
- Glass options: Clear, Frosted, Low-E, Tempered, Laminated
- Finish options: Premium Black, Pure White, Anodized Silver, Bronze, Champagne, Teak Wood
- Screen options: Retractable Screen, Sliding Screen
- Thermal performance: Polyamide thermal break, NFRC-rated glass packages available
- Installation standard: AAMA 2400/2410 compliant, AAMA 812 sealant protocol
- Impact resistance: Available with laminated glass for wind-borne debris zones
- Design pressure: Engineered for Miami-Dade and Broward County wind-load requirements
Performance Features
Thermal Efficiency. The polyamide thermal break physically separates the inner and outer aluminum, cutting heat transfer through the frame itself. Combined with a Low-E glass package, this window helps keep your Oakland Park cooling bill from spiking between May and October. NFRC-rated glass packages let you compare real U-factor and SHGC numbers before you commit.
Acoustic Performance. If you live off Commercial Boulevard or near Dixie Highway, traffic noise is part of daily life. The VLX 500’s laminated glass option adds a sound-dampening interlayer that measurably reduces exterior noise transfer. We can spec different glass thicknesses per panel to target specific frequency ranges where traffic and train noise sit.
Airtightness & Weather Seal. Multiple contact points along the interlocking rails, plus a full-perimeter gasket system, keep conditioned air on one side and exterior air on the other. That matters for two reasons in Oakland Park: lower energy waste and fewer humidity-driven problems like condensation inside the frame channel.
Waterproofing. Sliding windows fail in Florida when water finds a way into the track and sits there. The VLX 500 uses a sloped sill with weep holes sized to drain water fast during afternoon downpours, and the interlocking rails are designed to deflect wind-driven rain outward rather than catch it. Proper installation with AAMA 812 foam sealant keeps the frame perimeter watertight too.
Wind Resistance. Broward County has some of the strictest wind-load codes in the country. The VLX 500 is engineered and tested to handle design pressures required in our region, and the laminated impact glass option brings it into compliance for wind-borne debris zones. That’s not a luxury add-on; for many Oakland Park homes it’s a code requirement.
Security & Hardware. The multi-point locking mechanism engages at the meeting rail, adding resistance against forced entry that a simple cam lock doesn’t provide. Stainless steel rollers won’t corrode in salt-adjacent air, and the hardware is visibly heavier-duty than what you find on budget sliders sold at big-box stores.
Color & Glass Options
Six finishes give you room to match the existing look of your Oakland Park home or go a different direction. Premium Black and Pure White are the two most popular choices right now, especially on modern single-story homes and renovated mid-century houses in Coral Ridge and Rock Island. Anodized Silver reads as clean and commercial, which suits contemporary builds and condo buildings. Bronze and Champagne lean warmer and pair well with terra cotta roofs, travertine accents, and older Florida architecture. Teak Wood is a textured woodgrain finish that gives you the look of timber with none of the rot, termite, or repainting issues real wood brings in our climate.
On the glass side, Clear is the baseline for maximum visible light. Frosted works in bathrooms, side yards, or anywhere privacy beats the view. Low-E is the upgrade we recommend most often because it reduces solar heat gain without noticeably darkening the room, which is the whole game in South Florida. Tempered glass shatters into small pieces instead of sharp shards, which is required by code in certain locations like doors and low windows. Laminated glass is the impact option: two panes bonded with a plastic interlayer that holds together under impact, and it’s the choice when you need wind-borne debris compliance or meaningful sound reduction.
Installation by TruePane Windows & Doors in Oakland Park
A window is only as good as its installation. We’ve seen premium products fail within three years because someone sealed them with the wrong materials or set the frame out of square. That’s not a defect in the product; it’s a defect in the install. In fact, most manufacturer warranties, including ViewLux’s coverage, become void when the window isn’t installed by an authorized professional using the right procedures.
Our process starts with a pre-install inspection. We measure the existing opening, check for water damage or rot in the rough framing, and verify the header and sill are structurally sound. If we find rot behind an old window, which is common in Oakland Park homes built before the 1990s, we address it before the new window goes in rather than sealing over it and hoping.
On install day, we set every VLX 500 level, plumb, and square within tight tolerances. The frame gets anchored through the jamb, not through the sill, so weep holes stay clear. We apply AAMA 812 low-expansion foam sealant around the full perimeter, which insulates and seals without bowing the frame. The exterior receives properly backer-rodded and tooled sealant joints per AAMA 2400/2410 standards. After the panel goes in, we run a water test along the sill and track, cycle the panel several times to confirm the glide, and clean up all construction debris before we leave.
Oakland Park’s specific challenges include high humidity, intense UV exposure, and afternoon thunderstorms that arrive with little warning. Our installation methods are built for those conditions: UV-stable sealants, corrosion-resistant fasteners, and drainage planes that move water away from the rough opening instead of trapping it inside the wall.
Frequently Asked Questions - VLX 500 Sliding Window
What is the lead time for the VLX 500 Sliding Window? Most VLX 500 orders arrive at our Oakland Park warehouse in three to six weeks from final measurement, depending on glass and finish selection. Custom sizes and laminated impact glass can add one to two weeks. Call (863) 264-3649 to check current lead times for your specific configuration.
Does the VLX 500 qualify for energy tax credits? Yes, when configured with qualifying Low-E glass packages that meet the federal Energy Star criteria for windows in the South Florida climate zone. NFRC ratings on your specific glass package will determine eligibility, and we can provide those numbers before you order. Call (863) 264-3649 to review glass options that qualify.
What warranty comes with the VLX 500 Sliding Window? ViewLux provides a manufacturer warranty on the frame, hardware, and glass, and because TruePane Windows & Doors is an authorized installation partner, the warranty stays intact. Improper third-party installation voids most of that coverage, which is one reason so many Oakland Park homeowners let us handle the full scope from measurement to final inspection. Ask us for the full warranty document during your estimate.
Can I customize the size? Yes. Each VLX 500 is fabricated to the exact opening dimensions of your Oakland Park home rather than cut down from stock sizes. That means unusual widths, custom heights, and non-standard multi-panel configurations are all possible. We take precise field measurements so your frames fit the way they should.
How do I maintain aluminum frames? Wipe the tracks with a dry cloth every few months to remove sand and debris, and clean the glass with a mild soap solution. The powder-coated finishes don’t need repainting and won’t rust, but a quick rinse during pollen season keeps the track rolling smoothly. Avoid harsh chemicals or pressure washing directly at the frame joints, which can degrade the sealant over time. Call (863) 264-3649 if you ever have a glide or seal question, we’re happy to walk you through it.
Get a Quote - VLX 500 Sliding Window in Oakland Park
If you’re ready to price the VLX 500 for your Oakland Park home, we’ll come out, measure the openings, review glass and finish options with you, and put together a written line-item quote with no surprises. Estimates are free. Call (863) 264-3649 to schedule your on-site measurement, and we’ll take it from there.
Written by the team at TruePane Windows & Doors, authorized ViewLux installation partner serving Oakland Park, Florida.
Six Reasons Homeowners Choose TruePane Windows & Doors
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.
Other TruePane Windows & Doors Services
What Neighbors Say About TruePane Windows & Doors
Detailed Images



Before
After
Before
After
Before
After