Door Installation in Coral Springs - Free In-Home Measure, Written Price

Fast, Reliable Door Installation Across Coral Springs

If you live in Coral Springs and your entry door binds in July or your patio slider won’t lock without lifting the handle, you’re not imagining the problem. Homes in Coral Springs were built as master-planned communities, most between the mid-1970s and early 1990s, and the original doors are now 35 to 50 years old. Aluminum frames corrode in the humidity, seals fail, and the concrete block rough openings were rarely cut to modern standard sizes. We replace and install doors across Coral Springs, including Ramblewood, Eagle Trace, Maplewood, and the neighborhoods along Wiles Road and Sample Road. Call (863) 264-3649 for a free, written estimate.

Call (863) 264-3649

This page was built to answer one question Coral Springs homeowners ask us constantly: what does door installation actually cost here, and why do quotes from different companies land so far apart? The short answer is that custom sizing is the norm in Coral Springs, not the exception. We’ll get into the numbers below.

Why TruePane Windows & Doors Is Coral Springs’s Preferred Door Installation Company

TruePane was founded in 2008 by second-generation glazier Dale Kessler, and what we’ve learned in the years since is that Coral Springs homes punish contractors who take shortcuts. We don’t quote off-the-shelf sizes and hope they fit. Our technicians measure every opening twice, and when the rough opening runs 2 inches off standard block-course increments, that’s in the quote from day one.

The single most common failure we see in Coral Springs is a door that was ordered without impact certification, installed without a wind mitigation inspection, and left the homeowner holding a $1,200 higher insurance premium every year. We won’t install that door. Every unit we put in is rated for the 140+ mph design wind speed zone Coral Springs sits in, and we register both manufacturer warranty layers in writing before the truck leaves your driveway. That’s the Keystone Standard, and we put it on paper.

Background checks, uniforms, and measurable craft are the baseline. The nice part is that our crew shows up on time and respects your home the way we’d treat our own mother’s. We answer the phone 24/7, we offer a Done Right Promise on every job, and we mean it. Call (863) 264-3649 to schedule your free estimate.

Our Door Installation Services in Coral Springs

We install, replace, and service every residential door type you’ll find in a Coral Springs home. Here’s what most homeowners call us about first.

Entry & Swing Doors

Your front door is the first thing a guest sees and the first thing a wind mitigation inspector checks. In Coral Springs, entry doors must be impact-rated and documented for Broward County wind mitigation credits. We install fiberglass, steel, and wood entry doors with proper weatherstripping, threshold seals, and hardware rated for the 140+ mph wind zone. Our team handles the full tear-out, not a door slab swap, because the frame is usually the failed part.

Double & French Doors

French doors leading to a screened lanai are the signature opening in Coral Springs homes, especially in Ramblewood and the older subdivisions east of the Sawgrass Expressway. The original units were almost always aluminum sliders or single-pane French doors, and they’re now warped, fogged, or corroded. We install impact-rated, argon-filled, low-E French doors with fusion-welded frames and heavy-duty hinges. A typical French door replacement in Coral Springs runs $3,800 to $7,500 depending on width and swing configuration.

Bifold & Folding Doors

Bifold and multi-panel folding doors are a common upgrade for Coral Springs homeowners who want a wider opening from the living room to the patio. The challenge is that the original rough openings in CBS construction often won’t accept a standard four-panel system without header work. We handle that. A four-panel impact-rated folding door in Coral Springs typically runs $8,000 to $15,000 installed, and the lead time is 8 to 12 weeks for custom units.

Pivot Doors

Pivot doors are what we’re installing most often for Coral Springs homeowners doing a full front elevation refresh. A true pivot system distributes the door’s weight through a top and bottom hinge, so you can run a taller, heavier slab without sagging. The catch is that pivot hardware is unforgiving on rough openings. Coral Springs’s CBS block openings are rarely straight enough for a box-store pivot kit. We shim, square, and set these doors to a hairline tolerance, and we quote the custom slab size before you order. Expect $6,500 to $12,000 installed.

We also install Door Installation products like storm doors, arched and custom-shaped doors, and glass railing systems that complement any entry upgrade.

Trusted Brands We Service in Coral Springs

TruePane is an authorized installer for more than a dozen manufacturer lines, and in Coral Springs we lean on the brands best suited to our wind zone and humidity. PGT is our most-installed impact line for French doors and sliders. CGI and CWS are the go-to when a homeowner wants a heavier contemporary pivot or a custom arched entry. ES Windows fills the gap on the architectural side for taller openings and lighter glass-to-frame profiles. We quote these side by side on paper, not over the phone, so you can see exactly what each manufacturer charges and what the warranty term is.

Common Door Installation Problems We See in Coral Springs Homes

Here’s what we actually find when we walk into a Coral Springs house and pull the old door.

• Non-standard CBS rough openings. In Ramblewood and Eagle Trace, the original block-course layout means a “standard” 72×80 slider may not fit. We quote the actual rough opening, and if it needs a custom or modified unit, that’s in the price before you ever sign.
• Quote says $1,900 for a new front door, deposit paid, then “the opening is off.” That’s the most common cost overrun in Coral Springs. We don’t do that. We measure, quote, and put the price on paper in writing.
• No impact certification, no wind mitigation credit. If you install a non-impact-rated door in Coral Springs’s 140+ mph wind zone, the Broward County wind mitigation inspection fails. That means the insurance premium discount, often $500 to $1,500 per year, never happens.
• Original aluminum frames reused. We won’t install a new panel into a corroded original frame. It will fail within one South Florida rainy season. Full tear-out is our standard.

Pricing for Door Installation in Coral Springs, FL

Why You Need to Work With a Door Installer Who Knows Coral Springs Specifically

Here’s what we mean. Coral Springs was built as one of Florida’s first truly master-planned cities. Coral Ridge Properties laid out the streets, the schools, the greenbelts, and the residential lots same time, same crews, same block suppliers. The CBD homes in Ramblewood, the subdivisions around Northwest 23rd Street, the older streets near Coral Square, all went up in the same way. The block course in those homes often doesn’t line up with the 80-inch or 96-inch rough opening standard that modern door manufacturers assume. A door supplier three states away doesn’t know that. A national franchise installer who’s never touched a CBS block opening in Coral Springs doesn’t know it either. We do, because we’ve measured hundreds of these openings.

In a Ramblewood two-story CBS home, our crew replaced a corroded aluminum slider leading to the screened lanai with a custom Simonton impact-rated French door. The original opening was 2 inches off a standard block-course dimension. We modified the jamb and used a fusion-welded frame with argon-filled, low-E insulated glass to eliminate seal failure and qualify the owner for Broward County wind mitigation credits. That’s the difference between a quote that holds and a job that goes off the rails at the first flashing tape.

And then there’s the insurance conversation. Coral Springs sits inland, roughly 20 miles from the coast, but the Florida Building Code treats it as a 140+ mph wind speed zone. That’s the same requirement as a direct oceanfront city. If you replace your doors with impact-rated units and a licensed inspector verifies the openings, Broward County’s wind mitigation program typically drops your annual premium by $500 to $1,500. That’s a return on your door investment every single year. A non-impact door gets you none of that.

What Affects the Final Cost of Your Door Installation in Coral Springs

Everyone wants a square price. Here’s the list of what actually moves your number.

• Whether your rough opening is standard or custom. In Coral Springs, custom is common. Custom slab and frame work adds 10% to 25% over an off-the-shelf unit, and we tell you before you order, not after.
• Impact certification. All our Coral Springs installations are impact-rated. Non-impact doors are cheaper on the front end and much more expensive every year after, because you forfeit the wind mitigation insurance credit. We don’t install them.
• Frame condition. If the original aluminum frame is corroded, rotted, or out of square, we do a full tear-out. A slab swap into a bad frame is a callback waiting for the first thunderstorm.
• Hardware and finish upgrades. Pivot hinges, flush thresholds, multipoint locks, custom finishes. These are line items you choose.
• Lead time. Custom doors in Coral Springs take 8 to 14 weeks from order to arrival. That’s a supply chain reality, not a labor delay. We keep the schedule honest and put the order in writing.

We Also Serve Cities Near Coral Springs

Our Coral Springs service coverage extends throughout northwest Broward County. We install doors in Margate, Coconut Creek, Pompano Beach, and Deerfield Beach on the same schedule, with the same pricing and the same written estimate policy. If you live in one of those cities, call (863) 264-3649 and we’ll get you on the calendar.

FAQs - Door Installation in Coral Springs

Get Your Free Door Installation Estimate in Coral Springs

You don’t need to know your rough opening size or whether you want a PGT or a CGI pivot. You just need a contractor who measures, quotes, and stands behind the work. That’s us. TruePane is led by Dale Kessler, a second-generation glazier who founded this company on a simple rule: if the pane is not true, the job is not done. We serve Coral Springs with a live person answering the phone 24/7, a Done Right Promise, and priced-in-writing estimates that don’t move after you sign.

Call (863) 264-3649 to schedule your free door installation estimate in Coral Springs. We’ll measure, we’ll quote, and we’ll put it in writing.

Written by Dale Kessler, Owner at TruePane Windows & Doors, serving Coral Springs and surrounding Broward County communities.