Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Sliding glass doors
Impact garage doorsPGTCGI
Before
After
Before
After
Before
AfterFast, Reliable Window Replacement Across Coral Springs
Window replacement in Coral Springs usually costs between $650 and $1,850 per opening for a standard impact-rated window installed, and full-frame jobs on older CBS homes run higher because the rough openings rarely match stock sizes. If you’re in Ramblewood, Eagle Trace, or anywhere along Sample Road or Wiles Road, our crews know exactly what’s behind your stucco and why it changes the bid. Call (863) 264-3649 and a live person answers, day or night. We don’t route you to a call center and we don’t ask you to fill out a form. Dale Kessler built TruePane Windows & Doors on a rule that’s still on the whiteboard: if the pane is not true, the job is not done.
Why TruePane Windows & Doors Is Coral Springs’s Preferred Window Replacement Company
We’ve been through enough Coral Springs homes to know what’s behind the stucco before we even pull a permit. The city’s CBS tract homes, built mostly between the mid-1970s and early 1990s, have rough openings laid out in block-course increments. That means the opening you’d assume is 48 inches wide is often 47 and a quarter, and a stock window simply won’t set right. We measure every opening twice and quote manufacturers side by side on paper, so you see the exact unit, the exact NOA approval number, and the exact price before we touch a screwdriver.
Coral Springs homeowners don’t need another contractor who promises a lot and then pads the bill with change orders. Our background-checked, uniformed technicians arrive when we say they will, and they work in your home the way they’d work in their own mother’s. The Done Right Promise is in writing: if it’s not done right, we make it right, no paperwork and no arguing. Both manufacturer warranty layers get registered before the truck leaves your driveway.
We coordinate scheduling from our South Florida office and crews serve Coral Springs directly. A live person answers the phone 24 hours a day, 7 days a week. That’s not a marketing line. Call at 3 a.m. and a person picks up.
Our Window Replacement Services in Coral Springs
Full Frame Replacement
Full frame replacement is the honest answer for most Coral Springs homes, and the reason goes back to how the city was built. Coral Ridge Properties poured thousands of CBS homes in master-planned subdivisions, and the window openings weren’t framed with dimensional lumber the way wood-frame houses are. They’re block-course increments. That means the original aluminum windows, installed 35 to 50 years ago, were often custom-sized from the start. A full-frame job lets us pull everything down to the bare opening, repair any rot in the wood bucks, flash the opening with marine-grade tape, and set a new window that actually fits. In neighborhoods like Ramblewood and along the Eagle Trace corridor, this is how we find and fix problems before they become wall-cavity leaks. A full-frame replacement in Coral Springs typically runs $950 to $2,400 per opening depending on size and impact rating.
Insert Window Replacement
Inserts, sometimes called pocket replacements, fit a new window into the existing frame. They’re a good option when the original frame is still square and sound, which is less common in Coral Springs than in newer cities, but it does happen. If the aluminum frame hasn’t corroded and the opening still reads true, an insert saves labor and preserves interior trim. Our technicians measure every opening twice and will tell you straight if an insert is a false economy. In many Coral Springs homes, the frame itself is the problem, and an insert just hides it. Insert replacement in Coral Springs generally runs $600 to $1,400 per window for impact-rated units.
Storm Window Replacement
Coral Springs sits about 20 miles inland, but the Florida Building Code puts this city in a 140+ mph design wind speed zone. That means storm windows here aren’t decorative. A proper replacement has to meet Broward County NOA or Miami-Dade product approval standards, the same as homes on the coast. We install impact-rated windows and doors that hold their glass in a named storm, and we register the wind mitigation paperwork that proves it. We also handle the storm window retrofit, where we replace older non-rated sashes with impact glazing while keeping the original frame where it’s still serviceable. Expect $700 to $1,700 per opening depending on size and product line.
Energy-Efficient Upgrade
Year-round humidity and afternoon thunderstorms don’t just corrode aluminum frames, they force your AC to work against heat gain through single-pane glass. Upgrading to low-E, argon-filled impact units cuts the radiant load and quiets the house. In Coral Springs, where the dominant stock is original single-pane aluminum sliders and jalousies, the energy conversation is really a comfort conversation. Those old jalousie blades leak conditioned air all summer. Replacing them with a sealed, insulated unit changes the way a room feels within the first week. Energy-efficient upgrades in Coral Springs run $650 to $1,500 per window, and most homeowners we work with see the difference on their next FPL bill.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Coral Springs
We’re an authorized installer for more than a dozen manufacturer lines, and we keep the conversation honest by quoting side by side on paper. For Coral Springs specifically, we find that Milgard and Simonton impact-rated lines fit the block-course openings well with minimal modification, and Jeld-Wen offers solid mid-range options for second-story bedrooms and rear elevations. We don’t push one brand. We show you the NOA approval numbers, the warranty durations, and the per-opening price, and you decide. Both warranty layers get registered in writing before the truck leaves your driveway.
Common Window Replacement Problems We See in Coral Springs Homes
- Frame corrosion that binds the sash shut. Salt-laden condensation from South Florida humidity works into the aluminum tracks, and within 10 to 15 years the sash won’t budge. Forcing it bends the hardware and cracks the glass. The fix is a full-frame replacement with properly flashed openings and stainless or hot-dip hardware.
- Seal failure on original jalousies and single-pane sliders. Humid air moves through failed seals into the wall cavity and rots the wood bucks hidden behind the stucco. By the time you see the fog between the panes, the damage is already working. We find this constantly in the older Coral Springs subdivisions.
- Non-impact glass in a 140+ mph wind zone. Original windows from the 1970s and 1980s shatter under windborne debris. The window fails, wind-driven rain floods the block house, and the drywall is gone before the storm passes. Broward County wind mitigation credits only apply to verified impact openings, which is why this upgrade often pays for itself in reduced premiums.
- Contractors making undersized units fit with caulk. Non-standard block-course rough openings tempt a rushed crew to use a smaller stock window and fill the gap. The gap leaks air and water from day one. We order custom or modified units that actually match the opening.
Pricing for Window Replacement in Coral Springs, FL
Here’s what we quote in Coral Springs, and these numbers come from actual jobs in this city, not a national table. A single standard impact-rated insert window runs $600 to $1,400. A full-frame replacement on a typical CBS opening runs $950 to $2,400. A large sliding glass door replacement to a screened lanai, with impact glazing, runs $2,800 to $5,500. Custom sizes required by block-course rough openings add roughly 10 to 18 percent, which is still cheaper than a stock unit shoehorned into a bad fit that leaks for a decade. We give written, line-item quotes with fixed pricing, and we don’t hit you with change orders once the stucco is open. Call (863) 264-3649 for a free estimate, and we’ll put the numbers in front of you before you have to decide anything.
We Also Serve Cities Near Coral Springs
Our crews serve Coral Springs and the surrounding communities, including Margate, Coconut Creek, Pompano Beach, and Deerfield Beach. If you’re just over the line in one of those cities, the same crew, same pricing, and same Done Right Promise apply. Learn more about our Window Replacement in Coral Springs service area, or explore the full Window Replacement team’s capabilities anywhere in Broward County.
Serving Coral Springs, FL - Our Local Coverage Area
We’re based in the Coral Springs area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Window Replacement in Coral Springs
Because the rough openings in Coral Springs CBS tract homes were laid out in block-course increments, not the dimensional lumber framing you see in wood-frame houses. A “stock” 48-inch window is often an inch too wide or too narrow for the actual opening. That’s a real measurement we take on nearly every job in this city. Custom or modified units are the norm here, and any contractor who quotes you stock sizes before measuring is guessing. Call (863) 264-3649 and we’ll measure every opening twice before we price anything.
Most major brands carry Broward County NOA approval for the Florida Building Code’s high-velocity hurricane zone, including Milgard, Simonton, and Jeld-Wen impact lines we quote regularly for Coral Springs. The NOA number is what ties the product to your wind mitigation inspection. We register that paperwork for you. The manufacturer lines we quote side by side on paper all include the NOA documentation listed on the quote, so you can verify it before you sign. Call (863) 264-3649 for a free quote with the NOA numbers printed in front of you.
If the aluminum frame is corroded, bowed, or leaking at the sills, full frame replacement is the honest repair. Inserts only make sense when the existing frame is square, sound, and hasn’t been damaged by salt-laden condensation. In Coral Springs, where many homes have original 1970s and 1980s aluminum, the frame is often the weak point, so inserts are less common than they are in newer cities. Our technicians will tell you straight which one you need, and the answer is based on measurements, not on what we’d rather sell. Call (863) 264-3649 to schedule a free assessment.
Yes, and this is one of the reasons window replacement in Coral Springs makes financial sense beyond comfort and storm safety. Broward County’s wind mitigation inspection program directly ties verified impact openings to premium reductions, often $500 to $1,500 a year. We installed a slider in the Ramblewood corridor recently where the homeowner’s wind mitigation inspection passed after our work, and their annual premium dropped by roughly $900. We register both warranty layers and provide the documentation your inspector needs. Call (863) 264-3649 and we’ll show you the paperwork trail before you commit.
The difference comes down to hardware and components. A cheap impact window uses standard steel rollers, standard fasteners, and thinner frames that corrode fast in South Florida humidity. A marine-grade unit uses stainless or hot-dip hardware, marine-grade tape at the flashing, and fused or mechanically fastened frames designed for constant moisture. For a lanai slider that faces the afternoon storms, the marine-grade spec is what prevents a repeat replacement in a decade. We quote both options on paper so you can see the price gap and decide with your eyes open. Call (863) 264-3649 for line-item pricing on the exact product, not a vague ballpark.
Written by Dale Kessler, Owner at TruePane Windows & Doors, serving Coral Springs and surrounding Broward County communities since 2008.
Six Reasons Homeowners Choose TruePane Windows & Doors
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.