Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Sliding glass doors
Impact garage doorsPGTCGI
Before
After
Before
After
Before
AfterFast, Reliable Window Replacement Across Sunrise
Window replacement in Sunrise, FL is not a generic job. Every permitted opening in this city must carry a Florida Product Approval or a Miami-Dade Notice of Acceptance (NOA) because Sunrise sits entirely inside Broward County’s High Velocity Hurricane Zone. That single fact decides which windows survive inspection, which frames hold up to salt air, and which bids actually make sense. Our crews replace windows in Sunrise neighborhoods every week, from Sunrise Golf Village to Springtree, and we stock only NOA-listed product so your job passes the first time. Call (863) 264-3649 for a free estimate, and you will talk to a live person, not a voicemail tree.
Why TruePane Windows & Doors Is Sunrise’s Preferred Window Replacement Company
We have been doing this long enough to know what Broward County inspectors will flag and what they will pass. Our Window Replacement team measures every opening twice and registers both warranty layers in writing before the truck leaves your driveway. That is The Keystone Standard, and it applies to every job in Sunrise, no exceptions.
What Sunrise homeowners tell us most often is that they have been burned once already. A fogged seal. A door that binds in July. A contractor who stopped answering the phone. We hear it on half our estimates. So we do the opposite: background-checked, uniformed technicians, a live person on the phone 24 hours a day, and a Done Right Promise that says if the pane is not true, the job is not done. We are not the cheapest bid in Sunrise. We are the last call you should need to make.
Our Window Replacement Services in Sunrise
Full Frame Replacement
Most Sunrise homes built before 1994 need full-frame replacement, not inserts. The original single-pane aluminum frames in those 1960s and 1970s CBS tract homes were never flashed, never thermally broken, and never designed for HVHZ wind loads. On a 1960s CBS ranch in Sunrise Golf Village, our crew tore out a corroded original aluminum slider with a failed insulated glass unit, the argon long gone and the sash jamb eaten by salt air, and set a full-frame Miami-Dade NOA impact casement with stainless steel hardware and marine-grade flashing tape. The old frame crumbled at the corners. The new fusion-welded sash sealed tight against the humid Atlantic breeze. That is the difference between a patch and a replacement.
Insert Window Replacement
Insert replacements make sense in some Sunrise condos and newer homes where the existing frame is square, dry, and properly flashed. But we will tell you honestly when an insert is the wrong call. Over an original unflashed frame, an insert traps moisture behind the nailing fin, and Broward inspectors catch that at rough inspection. In most pre-1994 Sunrise homes, full-frame is the only path that passes.
Storm Window Replacement
Sunrise homeowners who want impact protection on a budget often ask about storm windows. We install exterior storm units that carry a Miami-Dade NOA and can bring an existing opening up to HVHZ compliance without a full tear-out. That said, a storm window never fixes a rotted frame. If the sash is pitted from salt air or the jamb corners are showing corrosion, the frame goes first.
Energy-Efficient Upgrade
The humidity and UV load in Sunrise shorten the life of low-grade Low-E coatings fast. Cheap coatings develop a milky haze between panes within three to five years when exposed to Broward’s humidity cycles and hurricane pressure swings. The energy-efficient upgrades we specify for Sunrise use laminated HVHZ glass with coatings rated for coastal exposure. You get the utility savings without the premature film failure.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Sunrise
We are an authorized installer for more than a dozen manufacturer lines, and for Sunrise specifically we stock and recommend products from, PGT. What matters in this city is the NOA mark and the hardware spec. PGT’s Miami-Dade impact lines, Andersen’s coastal-rated sashes, and Marvin’s marine-grade finish options are all product families we quote side by side on paper so you see exactly what you are buying and what it costs. No mystery brands, no house lines we will not put in writing.
Common Window Replacement Problems We See in Sunrise Homes
- Pinhole corrosion at jamb and sash corners: Original 1970s non-impact aluminum sliders in Sunrise develop pitting from salt-laden air within twenty years. Wind-driven rain finds those pinholes and soaks the wall cavity during summer squalls. The fix is full-frame replacement, not caulk.
- Failed insulated glass units: The argon leaks out and the Low-E film hazes over, especially on west-facing exposures along Sunrise Boulevard and Welleby. Homeowners notice condensation between the panes that never dries. That unit is done.
- Insert replacements installed over unflashed frames: We see this on homes where an out-of-area contractor cut corners. Moisture gets trapped behind the nailing fin, stucco rots within a wet season, and the inspector fails the job at rough. The original frame has to come out.
- Florida Product Approval units without the Miami-Dade NOA: Some contractors stock only Palm Beach-compliant product because it is cheaper. It fails Broward final inspection every time, and the homeowner waits weeks for a re-order with open openings. We do not stock anything that is not NOA-listed for Sunrise.
Pricing for Window Replacement in Sunrise, FL
We Also Serve Cities Near Sunrise
Our crews run Window Replacement in Sunrise and regularly work in Oakland Park, Fort Lauderdale, Wilton Manors, and Lauderdale Lakes. Scheduling is coordinated from our Miami (South FL) office, and the same NOA-listed product and Done Right Promise apply on every job in Broward County.
Serving Sunrise, FL - Our Local Coverage Area
We’re based in the Sunrise area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Window Replacement in Sunrise
You need a Miami-Dade Notice of Acceptance or an explicit HVHZ designation. Sunrise is inside Broward County’s High Velocity Hurricane Zone, and Broward inspectors reject any unit that carries only a general Florida Product Approval without the HVHZ or NOA mark. We stock only NOA-listed product for Sunrise jobs, so the unit that goes into your opening passes inspection the first time. Call (863) 264-3649 if you want to confirm your existing windows before you start budgeting.
Because the original frames in those homes were never flashed, and an insert traps moisture behind the old nailing fin. Broward inspectors look for exactly that failure at rough inspection, and they fail it. In a 1970s Sunrise CBS tract home, full-frame tear-out is the standard scope of work that actually passes and actually stays dry. Call (863) 264-3649 and we will inspect your frames and tell you straight whether inserts are even on the table.
It narrows the field to manufacturers who test for Miami-Dade or Broward HVHZ certification. Brands like PGT, Andersen, and Marvin have coastal-rated product lines with NOA listings for Sunrise. Brands that only carry inland or Palm Beach-compliant product cannot be installed here and pass inspection. We quote the NOA-listed options side by side on paper. Call (863) 264-3649 for an exact quote, estimates are free.
Expect visible pinhole corrosion on original 1970s aluminum sliders within twenty to twenty-five years in Sunrise, versus thirty-plus inland. The Atlantic salt load, combined with summer humidity, eats soft aluminum at the jamb and sash corners first. We specify stainless steel hardware and marine-grade finishes for exactly that reason, and the upgrade runs $80 to $150 per opening. It is the cheapest insurance on the whole job.
A coastal-spec full-frame replacement in Sunrise runs $900 to $1,800 per opening, roughly $80 to $150 more per opening than an inland-spec version using standard hardware and flashing. The inland-spec job will cost you again within a decade when the frame corrodes, the sash jams, or the inspector flags the wrong certification. For Sunrise, we quote the coastal spec as the default because it is the only spec that makes sense here. Call (863) 264-3649 for a free estimate on your specific openings.
Written by Dale Kessler, Owner at TruePane Windows & Doors, serving Sunrise since 2008.
Six Reasons Homeowners Choose TruePane Windows & Doors
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.