PGT Roof Replacement & Installation Nationwide | TruePane Windows & Doors

PGT Roof Replacement & Installation in Oakland Park: What to Know First

PGT roof replacement and installation in Oakland Park typically runs $380 to $1,100 for most residential work, depending on whether we’re replacing glass units, rebuilding a frame, or setting a new PGT skylight or roof window. As an independent PGT service provider, we handle the full scope: replacement glass, hardware, flashing, and full unit installation. Most jobs are completed in a single visit, and every estimate is free. Call (863) 264-3649 to schedule one.

Call (863) 264-3649

This page is for Oakland Park homeowners who already have PGT roof products, or are planning to install them, and want to know what actually goes into doing the work right. We’ll walk through how PGT roof units fail in this climate, what we do about it, and what you should expect to pay before anyone shows up with a ladder.

Key Takeaways

• PGT roof windows and skylights in Oakland Park fail most often from flashing breakdown and seal fatigue, not from glass defects.
• OEM PGT parts are available for most current lines, but older series often require matched aftermarket components to keep the unit watertight.
• Every PGT roof job we do is covered by The Keystone Standard: both warranty layers registered in writing before we leave, and our Done Right Promise on the workmanship.
• Free estimates, written line-item quotes, and no surprise charges. Call (863) 264-3649.

How PGT Products Fail - and How We Fix Them

PGT builds a solid roof unit. But Oakland Park’s heat, humidity, and hurricane-season weather work on the edges of any window or skylight. Here’s what we see most often on PGT roof products in this area, and what we do about it.

• Flashing failure on PGT WinGuard roof windows. The laminated glass holds up fine; the problem is the flashing kit. After ten to fifteen years of Broward County sun and storm cycles, the original flashing can pull away from the curb or the roof deck. Water gets behind it and into the ceiling before you see a stain. We pull the unit, inspect the curb, replace the flashing with fresh PGT-matched material, and reseat the unit so it drains the way it should. The fix on a flashing problem is never caulk over the old flashing; it’s a proper reset.
• Seal fatigue and condensation between panes on PGT SkyView roof glass. You’ll notice a fog that doesn’t wipe off, especially after a hot afternoon followed by a cool evening. That’s the insulated glass seal letting go. On PGT roof units, we replace the glass pack itself rather than the whole frame, which keeps the cost down and the original roof penetration intact. We’ll tell you upfront whether your unit still qualifies for PGT’s glass warranty before we order anything.
• Operator and hinge wear on PGT venting skylights. The mechanism gets stiff, then the crank starts slipping, and then the unit won’t close fully against the weatherstripping. On PGT venting roof windows, we replace the entire operator assembly rather than greasing a worn gear. A roof window that won’t close tight is a leak waiting for the next heavy rain, so we treat this as a repair, not a tune-up.
• Latch and lock alignment on PGT roof hatches. Over time, the frame shifts a fraction with the roof trusses, and the latch no longer seats. On PGT roof access windows, we realign the frame and replace the latch components, checking the curb for rot while we’re in there. This is one of those repairs that looks small but requires someone who understands the frame geometry, not just a hardware swap.
• Frame corrosion on older PGT roof units in coastal Oakland Park zones. Homes closer to the Intracoastal see more salt in the air, and older PGT aluminum roof frames can develop corrosion at the corners. We inspect the structural integrity of the frame itself, not just the visible surface. If the frame is sound, we clean and treat the corrosion and replace the affected seals. If it’s compromised, we’ll tell you straight and quote a full unit replacement rather than patching something that will fail again next season.

Our PGT Roof Replacement & Installation Process

Here’s how a PGT roof job goes when you call TruePane.

1. 1
   The call. A live person answers, 24/7. We talk through what you’re seeing, ask about the age of the unit, and schedule a time that works. No voicemail trees, no callback forms.
2. 2
   The site inspection. A uniformed technician comes out, measures the opening twice, checks the curb, the flashing, and the roof surrounding the unit. We look at the whole picture because a roof window problem is rarely just a window problem.
3. 3
   The written quote. We put the numbers on paper before we start, with line items. OEM PGT parts aren’t always the right call for older units; we’ll explain exactly why we’re recommending what we’re recommending, and you’ll see both options side by side when they exist.
4. 4
   The work. We remove the old unit or failed components, prepare the opening, set the new flashing or replacement frame, and set the glass. The roof gets sealed correctly, not quickly. Our rule is if the pane is not true, the job is not done.
5. 5
   The test and the warranty. We test the unit for seal, drainage, and operation. Then we register both manufacturer warranty layers in writing before the truck leaves your driveway. You get the documentation, with durations stated, along with our Done Right Promise covering the workmanship.
6. 6
   The cleanup. We leave your property the way we found it, minus the failed unit. Old hardware and glass go with us, and we sweep up. That’s part of the job too.

Dale Kessler, our founder, learned this work at McFatter Technical College in Davie and spent years as a lead installer across Broward County before starting TruePane. We still measure like someone who plans to stand behind the work: if it is not sealed right, it is not done.

What PGT Roof Replacement & Installation Costs in Oakland Park

These are the ranges we quote most often for PGT roof work in Oakland Park. Your specific price depends on the unit size, the roof pitch, access, and whether we’re repairing components or replacing the entire unit.

• PGT roof window glass replacement (fogged or cracked unit): $280 to $650
• Flashing replacement and reseal (existing PGT roof window): $350 to $800
• Operator, hinge, or latch replacement on PGT venting units: $180 to $450
• Full PGT fixed skylight replacement (standard residential size): $650 to $1,100
• Full PGT venting roof window replacement: $850 to $1,400

What moves the price is the condition of the curb and roof decking around the opening. If the structure underneath is rotted or out of level, we’ll quote the framing repair as a separate line item so you know exactly what you’re paying for and why. No hidden line items, no change orders that show up after the work starts. Call (863) 264-3649 for an exact quote. Estimates are free.

Why Oakland Park Homeowners Call TruePane Windows & Doors for PGT Work

We’ve served Oakland Park and the surrounding area for years, and we treat PGT roof work the way a craft tradesperson treats it: measure the opening twice, quote the options on paper, and register both warranty layers in writing before the truck leaves your driveway. That’s The Keystone Standard we put on every job, along with the Done Right Promise: if it is not done right, we make it right. No paperwork fights, no fine print that covers neither.

Our technicians are background-checked and uniformed. They know PGT’s product lines, but they also work across more than a dozen manufacturer lines including CGI, CWS, ES Windows, and ECO Window Systems. That matters if you’re considering whether to stay in the PGT system or explore something else. We’ll give you a straight comparison on paper, not a sales pitch. A live person answers the phone 24 hours a day, 7 days a week, and we plan to be in this community for the next thirty years. Call (863) 264-3649 for a free estimate.

FAQs