Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Sliding glass doors
Impact garage doorsPGTCGI
Before
After
Before
After
Before
AfterCGI Roof Replacement & Installation in Oakland Park: What to Know First
CGI roof replacement and installation in Oakland Park is work we do as an independent CGI service provider, not as a factory arm. Most CGI roof jobs in this area run from initial inspection to finished install in two to five days, depending on the scope and what we find under the old system. Pricing stays honest because we quote line by line on paper before any work starts, and we do not change the number once it’s written.
This page is for Oakland Park homeowners who already own CGI products, or who are considering them, and want roof replacement and installation done by a crew that knows the brand specifically. Call (863) 264-3649 and a live person answers, 24 hours a day, 7 days a week.
How CGI Products Fail — and How We Fix Them
- CGI Sentinel Series roof panels and wind-driven water intrusion. In Oakland Park, we see Sentinel Series panels that were installed ten or fifteen years ago with sealant that has dried and cracked along the laps. Water doesn't pour in; it wicks in during a hard August storm and shows up as staining weeks later. The fix is a full lap reseal with a marine-grade sealant rated for coastal UV, not a quick bead of hardware-store caulk.
- CGI Estate Collection flashing failures at the curb and rake. The Estate Collection holds up well structurally, but the factory flashing detail is the first thing to go when the original installer cut corners. Once the flashing lifts, wind gets under the edge and starts working the fasteners loose. We pull the affected panels, replace the flashing to manufacturer spec, and reset the panels with new gasketed fasteners.
- CGI Targa Series by CGI (impact-rated roof glazing) seal degradation. Targa units in Oakland Park take direct sun on southern exposures. The edge seal breaks down faster than the glass, which leads to condensation between lites and a compromised thermal break. We replace the insulated glass unit and re-glaze the frame, registering the new unit under the manufacturer warranty before we leave the job.
- CGI aluminum roof decking with electrolysis at dissimilar metal contact points. We find this on older CGI aluminum systems where the original installer used steel fasteners without isolation washers. Salt air in Oakland Park accelerates it. The decking corrodes around every fastener hole. The correct fix is replacing the affected panels and switching to stainless fasteners with neoprene washers, which stops the galvanic reaction at the source.
- CGI Classic Series panel oil-canning from improper clip spacing. This is common when a non-specialist installed the roof. The panels look wavy in certain light because the clips were spaced too far apart or not aligned. It's not a product defect; it's an installation defect. We correct clip spacing, re-secure the panels, and the roof flattens out the way CGI designed it to sit.
Our CGI Roof Replacement & Installation Process
- 1
Call and talk to a person. You reach us at (863) 264-3649. We listen to what you're seeing, ask about the age of the system and the last time anything was serviced, and set an appointment that works for you.
- 2
We measure everything twice. Dale Kessler grew up off Prospect Road in Oakland Park, and the rule on every job is the same: if the pane is not true, the job is not done. We measure the roof plane, the clip spacing, the curb, the rake, and the underlayment condition before we quote anything.
- 3
Written quote with parts decisions made on paper. We show you OEM CGI components and quality aftermarket options side by side, with prices, so you decide with your eyes open. No one gets a surprise line item later.
- 4
Replacement and installation. The old system comes off, the substrate gets inspected, and the new CGI panels or glazing go in per manufacturer installation specs. Background-checked, uniformed technicians do the work.
- 5
Test and register. We water-test the finished installation, register both warranty layers in writing, and walk the roof with you before we leave.
- 6
The Done Right Promise. If it is not done right, we make it right. No arguing, no fine print that covers neither.
What CGI Roof Replacement & Installation Costs in Oakland Park
CGI roof replacement in Oakland Park typically runs between $18 and $34 per square foot installed, depending on the product line and what we find beneath the old system. A straightforward CGI Classic Series panel replacement on a 1,500-square-foot roof usually lands in the $27,000 to $42,000 range. Estate Collection and Targa Series work runs higher because of the glazing and the structural details involved.
| CGI Roof Scenario | Typical Cost Range (Oakland Park) |
|---|---|
| Classic Series panel replacement, 1,500 sq ft | $27,000 – $42,000 |
| Sentinel Series lap reseal (full roof) | $3,500 – $7,000 |
| Estate Collection flashing repair and panel reset | $2,200 – $5,400 |
| Targa Series insulated glass unit replacement (per unit) | $800 – $1,900 |
| Full tear-off, new underlayment, and Classic Series install | $34,000 – $52,000 |
What moves the price: roof pitch, single-story versus multi-story, how much substrate repair the old system left behind, and whether you choose OEM CGI components or a quality aftermarket equivalent. We keep a permanent 5% discount for seniors and veterans. Call (863) 264-3649 for a free estimate with a written line-item quote.
Why Oakland Park Homeowners Call TruePane Windows & Doors for CGI Work
We have been serving Oakland Park and the surrounding communities since 2008, and Dale Kessler founded TruePane Windows & Doors in 2008 out of a clear principle: out-of-true installs and voided warranties were problems someone needed to fix permanently. Every CGI roof job we touch is covered by our Done Right Promise and The Keystone Standard — both manufacturer warranty layers registered in writing, durations stated, before the truck leaves the driveway.
We answer the phone with a live person, 24 hours a day, 7 days a week. Not a voicemail tree, not a callback form. When your CGI roof is leaking at 2 a.m. before a storm, you get a person. And because we work across more than a dozen manufacturer lines — including PGT, CWS, ES Windows, and ECO Window Systems — we can give you a straight comparison if you are weighing CGI against another brand for a full replacement. We will be here in thirty years. That is our standard.
FAQs
Most CGI roof replacement jobs in Oakland Park take two to five days from tear-off to final inspection. Larger or multi-story projects can run longer, but we give you a written timeline before we start and we hold to it. Call (863) 264-3649 to get a specific timeline for your roof.
No. Your CGI product warranty stays intact as long as the work is done to manufacturer installation specifications and the correct parts are used. As an independent CGI service provider, we follow those specs exactly and register both warranty layers in writing before we leave. We also stand behind the workmanship with our Done Right Promise.
We offer both, side by side on paper, so you see the price difference and the trade-offs clearly. For structural components like clips, fasteners, and flashing, we recommend OEM CGI parts. For sealants and some glazing components, a marine-grade aftermarket product can actually outperform factory spec in Oakland Park's coastal sun and salt air. You decide, with our recommendation in writing.
A typical CGI roof leak repair in Oakland Park runs between $400 and $1,400, depending on whether it is a simple lap reseal or a flashing replacement with panel resets. Full panel replacement is more. Call (863) 264-3649 for an exact quote. Estimates are free.
Yes. We will inspect the system, tell you what is failing and why, and show you what repair costs versus replacement costs in writing. If the roof has life left in it, we say so. We do not sell replacements that are not needed. Call (863) 264-3649 and we will give you a straight answer.
Written by Dale Kessler, Owner, TruePane Windows & Doors at TruePane Windows & Doors, serving Oakland Park and nearby areas.
Six Reasons Homeowners Choose TruePane Windows & Doors
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.