ES Windows Roof Replacement & Installation Nationwide | TruePane Windows & Doors

ES Windows Roof Replacement & Installation in Oakland Park: What to Know First

We handle ES Windows roof replacement and installation for homeowners throughout Oakland Park as an independent ES Windows service provider, and we’re not shy about what that means. Typical turnaround runs one to three days once the old roof is stripped and we can see what the flashing and curb conditions actually look like underneath. Most Oakland Park jobs land between $4,800 and $9,200 depending on roof pitch, decking condition, and whether you’re replacing a single skylight run or tying in a new ES Windows unit to an existing curb.

Call (863) 264-3649

This page is written for the Oakland Park homeowner who already knows ES Windows makes a solid product and now needs the roof work around it done without leaks, shortcuts, or a warranty that evaporates the first time it rains. If that’s you, call (863) 264-3649 and we’ll walk through what you’re seeing before we ever schedule a truck.

Key Takeaways

• We’re an independent ES Windows roof and flashing specialist, not a manufacturer affiliate. We install, don’t upsell.
• We register both manufacturer warranty layers in writing before leaving the driveway, and we keep a copy for our own files so nobody has to argue later.
• Warranty-safe installation is the whole job. A flashed opening that leaks voids more ES Windows warranties than any defect ever did.
• We use OEM parts where they matter for warranty and known-good aftermarket parts where OEM markup is the only difference.
• We serve Oakland Park, Wilton Manors, Fort Lauderdale, and the wider Broward corridor from our local shop.

How ES Windows Products Fail and How We Fix Them

After two decades of opening up roofs around Oakland Park, we can tell you the roof is where ES Windows installations earn their reputation or lose it. The window itself is rarely the first point of failure. It’s what happens at the curb, the flashing, the sealant, and the decking that determines whether you get twenty years of quiet service or a water stain spreading across the ceiling after the first wet season.

• The ES Advantage Series and the flashing line that runs short. We’ve pulled apart enough Advantage Series installs to know that the factory flashing kit works fine on a flat, solid curb, but Oakland Park roofers sometimes cut the back flashing short to save time on a steep pitch. That leaves the lower corners exposed. Wind-driven rain gets behind the sill flashing, and the leak shows up as a damp ceiling corner six months after the roofing crew is gone. We overlap the back flashing a full four inches past the curb and tuck it under the underlayment rather than relying on sealant alone.
• The ES Horizon Series on low-slope roofs. The Horizon Series is popular in Oakland Park because it handles wide openings well, but it assumes a minimum roof slope that not every mid-century carport conversion or lanai roof actually has. On low-slope roofing, the curb pan flashings need a stepped design to keep standing water from backing up under the unit. We see this on Oakland Park ranch homes where a patio roof was tied into the main slope years ago. The fix is a custom curb pan with soldered corners, not a bead of caulk.
• Older ES ES100 Series curb mounts with rotted wood curbs. The ES100 line held up well, but many Oakland Park homes from the 1970s and 1980s have original wood curbs that have been soaking up humidity for forty years. When the curb rots, the unit shifts, and the sealant tears. We replace the curb with pressure-treated dimensional lumber, flash it wet, and remount the unit level. The symptoms are a window that’s hard to operate after a storm plus visible gaps at the base.
• Improper aftermarket flashing on ES Series 9000 patio door installations. ES Series 9000 patio doors that span wide roof openings need continuous head flashing. A lot of roof replacement crews don’t have door experience, so they’ll splice the head flashing and rely on sealant at the seam. In Oakland Park’s summer downpours, that splice is where the water finds its way in. We run one continuous piece, no splices, and we check the door for deflection after the reroof.
• Sealant failure at the curb corners on any ES Windows product. ES Windows specs a specific sealant type for curb corners, and it’s not what most roofers keep in their truck. We use the manufacturer-specified sealant, tooled into place, never just smeared. A bead of generic silicone looks fine for a season, then it dries and cracks. By the time the homeowner notices, water has already gotten into the roof deck.

Our ES Windows Roof Replacement & Installation Process

We treat every ES Windows roof job like it’s our own roof getting opened up. Here’s how it goes from the first call to the last nail.

1. 1
   We talk first. You call (863) 264-3649 and describe what you’re seeing: the leak, the age of the roof, the ES Windows model if you know it. A live person answers. We’re not running your call through a script.
2. 2
   We inspect the roof and the unit. We look at the flashing, the curb, the decking, the drainage, and the ES Windows product itself. We measure the opening twice. We check whether the roof slope matches what the product requires.
3. 3
   We write the quote on paper. You see OEM parts prices and aftermarket alternatives side by side. If OEM doesn’t matter for warranty compliance on that part, we tell you. If it does, we say so. No surprise line items later.
4. 4
   We do the work in one visit. Roof stripped, curbs checked and replaced if needed, flashing installed to the manufacturer’s spec, the ES Windows unit remounted or replaced, and the opening sealed. Most Oakland Park jobs are completed the same day we start, and the largest ones take two to three days.
5. 5
   We test before we leave. We run water over the flashing and the seams with a hose. If the pane is not true, the job is not done. If water finds a path, we find it first. Then we clean up the site and walk you through what we did.
6. 6
   We register both warranty layers and hand you the paperwork. This is The Keystone Standard. The manufacturer warranty gets registered in writing, and our Done Right Promise starts the day we finish. If it’s not done right, we make it right. No fine print, no phone tag, no arguing.

What ES Windows Roof Replacement & Installation Costs in Oakland Park

Oakland Park pricing on ES Windows roof work depends on three things: the size of the opening, the condition of the roof deck and curb, and whether the existing unit is being reused or replaced. Below are the ranges we see most often in the field.

What moves the price is what we find under the old roof. Sodden decking, a compromised curb, an opening that was never flashed square from the start. We tell you what we found, what it costs to correct, and what happens if you leave it. Estimates are free, and the quote you sign is the price you pay. Call (863) 264-3649 and we’ll come measure.

Why Oakland Park Homeowners Call TruePane Windows & Doors for ES Windows Work

We’ve been doing window and door work in Oakland Park since 2008, the last seventeen through TruePane, and we’ve lived here long enough to know which roofs on which streets shed water wrong. Dale Kessler founded this company because he got tired of seeing warranties voided by installs that looked finished but weren’t. The Done Right Promise is the standard on every job, and it’s not a refund policy. It’s a repair promise. We come back and fix what wasn’t right, no fight.

Our technicians are background-checked and uniformed, and every one of them knows where an ES Windows product leaks at the roof line and why. We stock flashing and curb components for ES Windows openings alongside parts for PGT, CGI, CWS, and ECO Window Systems, so if you have another brand on the same roof, we handle the whole run without handing you off to another crew. We’re a local shop that sponsors county fairs and church roof funds because we plan to be in Oakland Park another thirty years. If you need an ES Windows roof installation done right, call us at (863) 264-3649.

FAQs