Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Sliding glass doors
Impact garage doorsPGTCGI
Before
After
Before
After
Before
AfterES Windows Window Installation: The Oakland Park Owner’s Guide
We install and replace ES Windows units throughout Oakland Park, with most standard window installations running $700-$1,400 per opening depending on size, series, and whether the frame needs repair. We stock ES Windows-compatible hardware and glass packs on our trucks, which means most single-window installations in Oakland Park are completed the same day we start. The typical call starts the same way: an owner notices the sash won’t stay up, there’s condensation inside the glass, or a crank handle has stripped clean off the operator.
What most Oakland Park homeowners don’t realize is that ES Windows builds to distinctly tight tolerances. The aluminum extrusion profile on an ES Windows frame is thinner and harder than what you’ll find on a builder-grade window, which means a part that “looks close” from a generic supplier often doesn’t seat right. We learned early on that close isn’t close enough on these units. If the pane is not true, the job is not done.
Which ES Windows Models This Applies To
ES Windows produces several series that show up regularly in Oakland Park homes built or remodeled between roughly 2005 and the present. The most common lines we service are the ES800 impact series, the ES700 single-hung and horizontal roller line, and the ES500 architectural series on higher-end renovations. Each line uses different glazing channels, balance systems, and hardware sets, and parts are not interchangeable across series.
The fastest way to identify what you have is to check the foil label on the inside edge of the frame or the top of the operable sash. ES Windows stamps series codes there, along with the glass type and impact rating if applicable. If the label has worn off – common on west-facing units in Oakland Park where afternoon sun cooks the adhesive – we match the part by measuring the glass thickness, the width of the aluminum channel, and the balance shoe profile. One gotcha we see often: an ES800 and an ES700 can share the same visible width and fool a parts counter, but their balance shoe depths differ by about 3 millimeters. That difference is exactly why a window that gets new balances still drifts or sticks. We carry both types on the truck and verify before cutting anything.
For replacement hardware, OEM ES Windows parts are available and we order them directly when a homeowner wants factory-original components. That said, after years in this trade, we’ll tell you plainly: for balance springs, pivot bars, and latch sets, the quality aftermarket equivalents from names like Amesbury and Truth hold up as well as OEM in Florida conditions and usually cost 20 to 30 percent less. We quote both options side by side on paper so you see exactly what you’re buying and what each layer of warranty covers.
Signs Your ES Windows Window Installation Is Failing
- Sash won’t stay up or drifts down on its own. The balance spring or constant-force coil has lost tension. On ES Windows units in Oakland Park, we see this most on windows facing east where morning humidity works into the balance channel and accelerates spring fatigue.
- Condensation between the glass panes. The insulated glass seal has failed. ES Windows uses a warm-edge spacer system, but Florida’s heat and humidity eventually defeat any seal – we replace the glass pack rather than trying to dry and reseal, because resealing leaves a film on the Low-E coating that never fully cleans up.
- Crank handle spins without moving the sash. The operator gear inside the crank mechanism has stripped. This is a small part with a big job – replacing it means removing the sash, so we handle it carefully rather than forcing a new handle onto a dead operator.
- Water stains on the interior drywall below the window. The weep holes along the sill track have clogged or the exterior perimeter seal has pulled away. In Oakland Park’s rainy season, this shows up fast. We clear the weeps and re-seal the perimeter, then check the rough opening for any water that got past the frame.
- Window is hard to slide or close, especially after a hot afternoon. The aluminum frame has shifted or the rollers have worn flat. ES Windows frames are extruded aluminum, which expands in heat – if the original rough opening was undersized or the frame was shimmed tight, thermal movement makes the sash bind.
Replacement Cost & What’s Included
In Oakland Park, a full ES Windows installation – removing the old unit, prepping the opening, setting the new window, sealing, and trimming – typically runs $700 to $1,400 per opening for standard sizes. Larger units, second-story work, or openings that need sill repair push toward the upper end. Replacing a failed glass pack alone runs $250 to $550 per pane depending on Low-E coating and impact rating. Hardware swaps – balances, cranks, latches – generally land between $150 and $400 installed.
Every quote we write includes parts and labor as separate line items, so you know what the hardware costs and what our time costs. There’s no “install fee” buried in the background and no change order after we open the wall. The work is covered by our Done Right Promise and The Keystone Standard: both warranty layers – the manufacturer’s and ours – registered in writing before the truck leaves your driveway. If it is not sealed right, it is not done.
DIY or Call Us?
There are things worth checking yourself: confirm the ES Windows series code on the frame label, note whether the problem is on the operable sash or the fixed panel, and clear any visible debris from the sill track. That information helps us quote accurately and bring the right parts on the first trip.
What we don’t recommend is pulling the sash yourself. ES Windows sashes on impact units can weigh 60 pounds or more, and the balance systems are under significant tension. A balance shoe that releases unexpectedly takes a surprising amount of force with it – enough to crack tile or hurt the person holding the frame. Removing an aluminum window from the opening and reinstalling it square, shimmed correctly, and sealed against wind-driven rain is not a weekend project. It’s what we do every day in Oakland Park. Call (863) 264-3649 and we’ll set a time that works, send a background-checked installer in uniform, and have the opening done right the same day in most cases.
FAQs
In Oakland Park’s heat, humidity, and salt air, we see ES Windows frames holding up 20 to 30 years with proper installation, but the insulated glass seals and moving hardware typically need attention around the 12 to 15 year mark. That’s the nature of coastal Florida – the aluminum frame lasts, the consumable parts don’t. Call (863) 264-3649 if you’re not sure what’s failing on yours.
Some parts can. Balance springs, pivot bars, crank operators, and latch sets are straightforward repairs we stock on the truck. A failed insulated glass seal cannot be repaired – the panes must be replaced as a unit because the desiccant inside the spacer is spent and the Low-E coating is compromised.
Most single-window installations in Oakland Park are completed the same day, usually in two to four hours including cleanup. Multiple windows or units that reveal rotted framing when we open the wall take longer, and we’ll tell you what we found before any additional work is approved.
We stock common ES Windows-compatible balances, rollers, crank sets, and glass packs on our trucks, and we order OEM parts directly for anything we don’t carry. We are an independent service provider, not affiliated with ES Windows, but we’ve worked with their product lines long enough to keep the right parts moving through our inventory. We also work with Andersen, and Pella parts for mixed-brand homes in Oakland Park.
Written by Dale Kessler, Owner, TruePane Windows & Doors at TruePane Windows & Doors, serving Oakland Park and nearby areas.
Six Reasons Homeowners Choose TruePane Windows & Doors
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.