Simonton Window Replacement Nationwide | TruePane Windows & Doors

Simonton Window Replacement: The Oakland Park Owner’s Guide

We stock and install Simonton-compatible replacement windows throughout Oakland Park, with most full-frame or insert replacements running between $450 and $1,100 per window installed depending on size, glass package, and whether the existing frame is salvageable. We carry the common Simonton balance assemblies, tilt latches, pivot bars, and weatherstripping on our trucks, so a simple hardware swap is often done in one visit. Most Oakland Park homeowners discover the problem the same way: a sash that suddenly drops, a crank that spins without moving, or condensation between the glass that will not wipe away.

Call (863) 264-3649

Which Simonton Models This Applies To

Simonton has built windows under several series names over the years, and the part that fits one line will not necessarily fit another. Here in Oakland Park we see more Simonton Reflections 5500 and 5050 double-hungs than anything else, along with a solid number of Simonton DaylightMax and old ProFinish units still in service. The gotcha most homeowners hit: Simonton changed balance shoe designs between production runs, and a balance that looks identical in a photo will be off by a few millimeters when it arrives. If you have a Simonton window that needs a part, the fastest path is to pull the sash out and read the laser-engraved code on the top edge of the glass. That code tells us the exact plant, date, and series, and it prevents the wrong-part-go-round that costs everyone a week.

When we replace Simonton hardware, we default to OEM parts for balances, locks, and tilt mechanisms. Simonton’s engineering tolerances are tight enough that aftermarket equivalents occasionally bind or wear the shoe prematurely. For weatherstripping and glazing bead, a quality aftermarket profile is generally fine and we will quote it that way if it saves you real money. We are an independent service provider, not affiliated with Simonton, but we have installed and serviced enough of their product in Broward County to know exactly when OEM matters and when it does not.

Signs Your Simonton Window Replacement Is Failing

• Sash drops when raised or will not stay up. This is almost always a failed balance assembly. Simonton uses a block-and-tackle balance on many series, and the cord inside fatigues after years of Florida humidity and use cycles. The window is not ruined, but the balance has to come out.
• Condensation you cannot wipe away. When moisture sits between the panes, the insulated glass unit seal has failed. Oakland Park’s salt air and hot summers accelerate seal failure, and no amount of caulk or cleaning will bring that unit back. It gets replaced, not repaired.
• Crank turns but sash does not move, or binds halfway. On Simonton casements, this usually means stripped gear teeth in the operator or a bent torque bar. We see it most on windows that face east and take the morning sun, because the hardware heats and cools in a way that loosens the gear over time.
• Window will not lock, or the lock feels loose and sloppy. A lock that does not engage flush means the sash has settled or the frame has shifted. In some Oakland Park homes with older slab foundations, this is a structural settling issue, not just a hardware problem. We measure before we replace anything.
• Drafts or visible daylight around the sash perimeter. Weatherstripping on Simonton windows is a wear item, and in our climate it typically holds for seven to ten years before it compresses permanently. A draft does not always mean a full window replacement. Sometimes it is forty dollars of new weatherstripping and a square reset.

Replacement Cost & What’s Included

For Oakland Park homes, a Simonton hardware replacement like a balance assembly, tilt latch pair, or lock typically runs $95 to $210 installed, parts included. A new insulated glass unit for a Simonton sash runs $180 to $400 depending on glass dimensions, low-E coating, and whether we are reusing the existing frame. A full window replacement, which we recommend when the frame itself is soft, out of square, or water-damaged, runs $450 to $1,100 per opening for most standard Simonton sizes.

Every quote we write is a line-item price on paper before work starts. You see the part cost, the labor, and the warranty terms. No change orders, no surprise line items when the bill comes. We register both manufacturer warranty layers in writing before our truck leaves your driveway, and our Done Right Promise covers the workmanship. If the pane is not true, the job is not done.

DIY or Call Us?

You can safely do a few checks yourself. Confirm the window is squarely seated in the frame. Wiggle the sash to see if it is the hardware or the frame that moves. Take a photo of the glass etching code so we can match the series. Those three things take ten minutes and they make the service call faster.

Where DIY goes wrong on Simonton windows is the balance spring. A block-and-tackle balance is under tension, and removing one without the proper technique can send the shoe flying and tear up the jamb track or your hand. The same goes for crank-out operators with torque rods. If your window has a spring or a wound assembly, leave it alone and let a trained technician handle it. Call us at (863) 264-3649 and we will get it done right.

FAQs