Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Sliding glass doors
Impact garage doorsPGTCGI
Before
After
Before
After
Before
AfterTherma-Tru Door Installation: The Oakland Park Owner’s Guide
We install and service Therma-Tru door systems throughout Oakland Park, FL, with most single-door installations running between $1,400 and $3,200 depending on the slab, frame condition, and hardware. We stock common Therma-Tru thresholds, sweeps, weatherstripping, hinges, and multipoint lock components on the truck, and we can order any OEM slab or frame piece for next-day delivery in most cases. Homeowners in Oakland Park typically discover a failing Therma-Tru door through a draft at the threshold, a deadbolt that no longer lines up, or a door that binds in the frame after years of Florida humidity working on the wood and composite surfaces.
Dale Kessler and our install crew have worked on Therma-Tru doors across Broward County for the better part of two decades. We know how these units fail in this climate, and we know what it takes to get one closing true again.
Which Therma-Tru Models This Applies To
Therma-Tru builds several door lines, and they are not all the same animal. The most common in Oakland Park homes are the Smooth-Star series, the Classic-Craft and Fiber-Classic lines, and the Pulse series for contemporary designs. Each takes different hardware preparation and slab tolerances, and the hinge mortise depth on a Smooth-Star slab is not the same as on a Classic-Craft unit. If you are replacing a slab and trying to reuse the existing frame, we measure that opening twice before ordering anything, because a 36-inch Therma-Tru slab is not always a true 36 inches once you account for beveling and the jamb thickness.
The frame is where we see the most confusion. Therma-Tru frames ship in a few standard jamb widths, and Oakland Park homes built in the 1970s and 1980s often have wall thicknesses that do not match any of them cleanly. We shim and trim and occasionally build out the jamb extension to close the gap, because a frame that is not seated flush is a frame that will run condensation along the bottom in July.
OEM vs. aftermarket: We recommend OEM Therma-Tru components for slabs, frames, and multipoint locks. The lock body geometry on a Therma-Tru door is tied to the slab routing, and a generic aftermarket multipoint typically means grinding out the pocket, which voids the slab warranty. For thresholds and sweeps, we stock quality aftermarket equivalents that match the Therma-Tru profile and often outperform the original in salt-air corrosion resistance, which is a real concern within a few miles of the Intracoastal.
Signs Your Therma-Tru Door Installation Is Failing
- Draft or light visible along the bottom rail. The sweep and threshold have worn or the threshold has settled out of level. Once the seal is gone, the door is costing you conditioned air every hour of the day.
- Deadbolt or latch no longer lines up with the strike plate. The slab has sagged, which is almost always hinge wear or a hinge mortise that was never fully seated. Forcing the lock every night accelerates the wear.
- Door drags or binds in the frame during the wet season. Composite and wood-composite slabs in Oakland Park absorb seasonal humidity. A door that rubs in June and swings freely in January is telegraphing a slab that needs re-setting, not a door that will fix itself.
- Condensation or mildew at the bottom corners inside the house. Water is getting past the threshold seal or wicking up from a degraded sill pan. On a slab-on-grade home this becomes a flooring problem if it goes a full rainy season.
- Multipoint lock only engages one point. The lock body or the shoot bolts are out of alignment. A three-point lock working as a one-point lock is a security downgrade with extra steps.
Replacement Cost & What’s Included
For Oakland Park homeowners, here is where the money goes and what we include when we install or replace Therma-Tru door components:
- Full door slab replacement (labor plus slab): $1,800-$3,200 depending on series, glass options, and whether the frame is reused
- Complete frame and slab replacement: $2,600-$4,500 including new threshold, sill pan, and exterior trim
- Threshold and sweep replacement only: $180-$360 installed
- Multipoint lock replacement or re-alignment: $240-$520 installed depending on OEM vs. aftermarket
- Hinge replacement and slab re-setting: $160-$380 depending on hinge count and mortise condition
Every quote is a written, line-item price before work begins. We register both manufacturer warranty layers in writing, state the durations, and back the workmanship with our Done Right Promise. If it is not done right, we make it right, no paperwork fights.
DIY or Call Us?
Two things are safe to check on your own: whether the screws in the top hinge are pulling out of the frame, and whether the sweep on the bottom of the slab is torn or compressed flat. Those two issues account for a lot of Therma-Tru complaints in Oakland Park, and you can tighten a hinge screw or note a failed sweep without risk.
What you should not do yourself is pull a slab off its hinges if it is glass-heavy, re-mortise a hinge pocket by hand, or reshape a threshold with a belt sander. A Therma-Tru door with a glass insert is heavy enough to injure someone when it comes out of the frame, and a threshold that is sanded unevenly channels water under the sill instead of away from it. We have repaired enough DIY threshold and hinge work in this city to know it costs less to call us first. If the slab is off, the frame is out, or the lock body is bound up, call (863) 264-3649 and have us look at it.
FAQs
A properly installed Therma-Tru door slab will last 25 to 35 years in Oakland Park; the hardware, threshold, and sweeps will typically need service every 5 to 8 years because of humidity, salt air, and daily use. The slab is rarely the first thing to fail. It is the seals and moving parts that wear, and replacing them on schedule keeps the door performing.
Yes, in the majority of cases we repair on-site; a binding slab, worn threshold, sagging hinge, or misaligned multipoint lock does not mean you need a new door. We will only recommend replacement when the slab itself is cracked or water-damaged or the frame has rotted, which is more common on homes near the water in Oakland Park.
A full slab-and-frame replacement in Oakland Park typically takes one day on site, including removing the old unit, setting the new one, trimming the exterior, and hauling off the debris. Hardware-only service, like a threshold or lock swap, is done in one to two hours.
We stock common Therma-Tru sweeps, thresholds, hinges, astragals, and multipoint lock bodies on the truck, and we can order OEM slabs and custom frames with next-day delivery in most cases. We also stock compatible parts for PGT, CGI, and CWS door systems if you have multiple units in the house.
If your Therma-Tru door is not closing right, sealing right, or locking right, call (863) 264-3649 for a free estimate. We will give you the price in writing before any work starts, and if the pane is not true, the job is not done.
Written by Dale Kessler, Owner, TruePane Windows & Doors at TruePane Windows & Doors, serving Oakland Park and nearby areas.
Six Reasons Homeowners Choose TruePane Windows & Doors
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.