Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Sliding glass doors
Impact garage doorsPGTCGI
Before
After
Before
After
Before
AfterTherma-Tru Impact Windows in Oakland Park: What to Know First
We install, replace, and service Therma-Tru impact windows for homeowners across Oakland Park as an independent Therma-Tru service provider. Most single-window replacements take one visit, and a full-home Therma-Tru impact package typically runs from a few days to two weeks depending on opening count and permitting. Our pricing is honest and line-itemed, not the cheapest in the room, but written down before work starts and never changed with a surprise add-on.
This page is for Oakland Park homeowners who already own Therma-Tru windows or doors, or who are considering them and want straight answers about how they hold up in our climate. If you have a Therma-Tru window that is fogged, leaking, binding, or failed a wind-mitigation inspection, call (863) 264-3649. A live person answers, day or night.
How Therma-Tru Products Fail - and How We Fix Them
Therma-Tru builds a solid door, but their window lines have specific failure patterns we see repeatedly in Oakland Park homes. Here is what we encounter most often, and what we do about it.
- Fogged insulated glass units on Classic-Craft and Pulse series windows. Therma-Tru’s dual-pane and impact-rated units rely on a perimeter seal that, after ten-plus years of South Florida humidity and direct sun, can fail along the bottom edge first. The telltale sign is haze that comes and goes with the temperature, then goes permanent. We remove the sash, measure the exact glazing pocket, and order a replacement IGU cut to factory spec. No shortcuts with generic desiccant packages.
- Warped or swollen sill channels on Therma-Tru sliding impact windows after repeated wet seasons. Oakland Park’s summer rain pattern means sill tracks sit in standing water more often than the manufacturers’ testing assumes. On older Therma-Tru sliders we see the vinyl sill develop a slight bow that makes the panel drag. We re-shim the frame, replace the sill track if it is beyond saving, and reset the panel so it locks square.
- Compression seal failure around Therma-Tru impact-rated fixed panels. The rubber compression gasket that makes an impact window air- and water-tight breaks down under UV and salt exposure faster here than on a temperate climate test wall. You will feel a draft or see water wicking at the corners during a driving rain. We pull the panel, clean the glazing channel, and install a new EPDM gasket sized to the frame, not a cut-to-fit roll from a hardware store.
- Multi-point lock misalignment on Therma-Tru impact casement windows in frame houses that shift. Oakland Park has plenty of homes built before current foundation standards, and even small settling can throw a multi-point lock out of register. The window will not close fully, or you have to lift and push to get the handle to throw. We check the frame for square, then either adjust the hinge stack or refit the lock plate. Forcing it just trims the lock mechanism’s life and leaves the window unsecured.
- Hardware corrosion on Therma-Tru impact windows within a mile of the salt air off the Intracoastal. Therma-Tru’s standard hardware finish is fine inland, but near the water we replace lock bars, hinge leaves, and crank mechanisms with marine-grade stainless or coated hardware more often. It is not a manufacturing defect, it is salt, and choosing the right replacement hardware makes the difference between a five-year fix and a fifteen-year fix.
Our Therma-Tru Impact Windows Process
A Therma-Tru job does not start with a toolbag, it starts with a tape measure and a conversation. Here is how we work from first call to final walkthrough.
- 1
Call and schedule the visit. You speak to a person, not a phone tree. We ask the basic questions: window type, age, what symptom you are seeing. We schedule a time and we show up when we say.
- 2
On-site evaluation. A uniformed, background-checked technician measures every opening twice, checks the existing window for square, and looks at the surrounding frame, flashing, and interior water staining. We want to know why a window failed, not just swap in another one.
- 3
Parts decision, written out. If the original Therma-Tru part is the right choice for warranty and fit, we use it. If an aftermarket part outlasts the OEM in our climate, we tell you that too, and we put both options on paper with pricing so you can see exactly what you are buying.
- 4
The work. We pull the old window, address any frame damage or rot we find, set the new or repaired unit, shim it level and true, and flash it properly. Most single-window Therma-Tru repairs are done in one visit.
- 5
Testing and clean-up. We cycle locks and operators, check the seal from the inside, then hose the exterior to confirm water is not getting past the new glazing or flashing. We sweep and haul debris.
- 6
Warranty registration before we leave. Both manufacturer warranty layers get registered in writing while we are still in the driveway, with the durations stated. Then we hand you the paperwork and explain the Done Right Promise.
What Therma-Tru Impact Windows Costs in Oakland Park
Pricing depends on what failed and what you are replacing it with. These are the ranges we quote most often for Therma-Tru work in Oakland Park:
- Fogged IGU replacement on a Therma-Tru impact window: $260-$480 per unit, depending on glass size and whether it is single or double-hung.
- Multi-point lock replacement and realignment on a Therma-Tru impact door: $180-$300, parts and labor.
- Full sash replacement on a Therma-Tru impact casement: $450-$700 per sash if the frame is sound and the track is reusable.
- Full-frame Therma-Tru impact window replacement: $1,100-$2,400 per opening, depending on size, product line, and permitting requirements.
What moves the price: whether the existing frame can be reused, glass package and impact rating level, and whether Oakland Park permitting requires additional engineering for the opening. We give you a written line-item quote before any work begins, and that is the number on the final bill. Call (863) 264-3649 for a free estimate on your specific Therma-Tru window.
Why Oakland Park Homeowners Call TruePane Windows & Doors for Therma-Tru Work
Dale Kessler grew up off Prospect Road in Oakland Park, back when half the houses still had original jalousie windows. He learned the trade at McFatter Technical College in Davie, then spent years as a glazier’s helper and lead installer across Broward County. We have been doing this work for a long time, and we plan to be doing it here in thirty years.
Every Therma-Tru job we do is backed by the Done Right Promise: if it is not done right, we make it right. No paperwork, no arguing, no fine print that covers neither. That sits on top of The Keystone Standard, which means both manufacturer warranty layers get registered in writing before the truck leaves your driveway. And if the Therma-Tru product is not the right fit for a replacement, we also work with PGT, CGI, CWS, and ES Windows, so you get a side-by-side quote on paper and can decide with your eyes open.
FAQs
Yes, we can often repair a Therma-Tru impact window under the original manufacturer warranty, but the specific coverage depends on your product line, age, and what failed. If you have your original paperwork, we will help determine whether the glazing, the frame, or the hardware is covered. If the window is covered, we handle the repair and register both warranty layers in writing. If it is not covered, we give you a written line-item quote before any work starts. Call (863) 264-3649 and we will walk through it on the phone.
Repair is almost always the better call if the frame is square, the opening is sound, and the issue is fogged glass, a failed seal, or worn hardware. Replacement makes sense when the frame is warped, water damage has spread into the rough opening, or the window no longer meets current Miami-Dade or Broward impact codes for its location. Our technicians will tell you which is which and why, with numbers on paper.
Most common Therma-Tru parts, like glazing units and standard hardware sets, arrive within three to seven business days in Oakland Park. If the part is backordered or the product line is older, the lead time can stretch. We always check part availability during the first visit and give you a date, not a shrug.
Yes, when the job requires a permit, we pull it and we handle the inspections. Oakland Park has specific requirements for impact-rated openings depending on your home’s wind zone and the window’s product approval number, and we make sure the permit and inspection are done correctly. We do not skip the permit to save a few dollars, because an unpermitted impact window is an insurance claim waiting to be denied.
No, fogged glass does not lower your wind mitigation credit directly, but a failed seal can indicate a larger glazing problem that might. What does matter is whether the window carries the appropriate product approval rating for impact or non-impact zones and whether it closes and locks properly. If you are not sure what you have, call (863) 264-3649 and we will check it during your free estimate.
Written by Dale Kessler, Owner, TruePane Windows & Doors at TruePane Windows & Doors, serving Oakland Park and nearby areas.
Six Reasons Homeowners Choose TruePane Windows & Doors
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.