Awning Windows

Awning Windows in Oakland Park, FL | TruePane Windows & Doors

Awning windows hinge at the top and crank outward from the bottom, so you can leave them cracked open during a Florida afternoon shower without water pooling on the sill. For Oakland Park homeowners, that single feature changes how a house breathes. TruePane Windows & Doors installs impact-rated awning windows across Broward County, pairing laminated storm glass with frames that hold up to coastal humidity, salt air, and hurricane-season wind loads. We work with PGT, CGI, CWS, ES Windows, ECO, and Mr-Glass lines, and every install is set level, plumb, and square by our own crew, not a subcontractor. Call (863) 264-3649 to talk through sizes and pricing.

Call (863) 264-3649

Product Overview - Awning Windows

Awning windows are top-hinged, crank-out units that shed rain while open for ventilation. In Oakland Park, where afternoon storms roll through from May to October, that geometry matters more than people realize. You get airflow without waking up to a wet window seat. The sash presses against the frame when closed and locked, which means fewer air leaks than a typical horizontal slider, and the crank mechanism lets you open the window with one hand, even over a kitchen sink or above a counter where a sliding sash would be awkward to reach.

These units are built for hurricane-prone construction. The glass is laminated impact glass with a PVB interlayer, the same concept as a car windshield: if a storm-driven object hits the pane, the glass cracks but the interlayer keeps the shattered pieces bonded in place. The frame is weathertight and reinforced, and the hardware is engineered to resist the positive and negative pressures a hurricane pushes against a building envelope. Architecturally, awning windows work well in Florida ranch homes, mid-century builds, and coastal contemporary designs. They’re commonly placed high on walls, in bathrooms, above doors, or stacked in wide openings where you want daylight and cross-breeze without giving up privacy. In Oakland Park’s older neighborhoods, we regularly see them replacing jalousie windows that leak air and offer nothing close to impact protection.

TruePane Windows & Doors supplies and installs these impact units throughout Oakland Park and the surrounding Broward County area. Every project starts with a site measurement and a conversation about which configurations make sense for the openings you actually have. Call (863) 264-3649 to schedule a measurement.

Technical Specifications

Awning window configurations vary by opening size and wind zone. The specs below cover the standard options we quote most often for Oakland Park homes.

• Frame materials: Aluminum or vinyl. Aluminum offers a slimmer sightline and a more rigid feel. Vinyl offers natural thermal insulation and a softer interior profile. Both are available in impact-rated configurations.
• Glass options: Laminated impact glass with a PVB interlayer, Low-E insulated glass, tinted glass, or clear glass. Laminated impact glass is the storm-rated core; Low-E and tinted options layer on energy performance and glare control.
• Finish options: White, Almond, Bronze, Black, or Tan. Finishes are applied to resist fading under South Florida UV exposure.
• Screen options: Fixed screens or retractable screens. Fixed screens stay in place year-round. Retractable screens roll away when you want a completely clear view.
• Sizing: Widths and heights are configured per opening. Because these are custom-ordered for each job, odd sizes and specific mulling patterns are workable.

Hurricane & Compliance Performance

Awning windows from TruePane Windows & Doors are supplied and installed to meet Florida’s High-Velocity Hurricane Zone standards. Here’s what that means, in plain terms, for an Oakland Park home.

Laminated Impact Glass
Laminated glass uses a PVB (polyvinyl butyral) interlayer sandwiched between two panes. Under impact, the glass fractures but the interlayer holds the pane in the frame. The window can be cracked or badly damaged and still keep wind, rain, and debris on the outside where they belong. This is the core of what makes an “impact window” different from standard glass.

Miami-Dade NOA and Florida Product Approval
Not every window sold in Florida carries this documentation. Our awning windows carry Miami-Dade NOA (Notice of Acceptance) and Florida Product Approval numbers issued per configuration. That means the specific unit quoted for your job has been evaluated and accepted for use in HVHZ jurisdictions. We verify the approval numbers on your specific quote before you sign anything.

FBC / HVHZ Compliance
These units are engineered to Florida Building Code (FBC) High-Velocity Hurricane Zone (HVHZ) requirements. Oakland Park falls within Broward County’s HVHZ jurisdiction, so this is not an upgrade or an option. It’s the baseline. If a window is not HVHZ-compliant, it does not belong in a permitted residential installation here.

TAS 201 / 202 / 203 Testing Context
HVHZ-rated products are tested under a specific protocol family: TAS 201 covers large-missile impact, TAS 202 covers cyclic wind-pressure loading, and TAS 203 covers forced-entry resistance. Together, these tests simulate what a product endures during a hurricane: a piece of debris hitting the glass, then hours of repeated pressure cycling, then someone trying to pry entry through the damaged unit. Our awning windows are supplied from manufacturers whose products are tested to this standard.

Design Pressure for Your Wind Zone
Design pressure is the structural rating that tells you how much wind load the window can resist. Our awning windows are matched to your wind zone, up to +/-100. Never higher. Every home in Oakland Park sits in a specific wind zone based on exposure, roof height, and proximity to the coast. We confirm the design pressure requirement on your specific opening before ordering, and we do not sell you a higher pressure rating than your structure actually requires, because that’s wasted money.

Energy Performance Options
Low-E and insulated glass options are available for homeowners who want more than impact protection. Low-E coatings reduce solar heat gain, which matters on west-facing walls in Oakland Park that catch the full afternoon sun. Insulated glass units add an air space that improves thermal performance year-round. Combining laminated impact glass with a Low-E insulated configuration gives you storm protection and meaningful energy performance in one unit.

Color & Glass Options

Color lands differently on a Florida house than it does anywhere else. Bright sun, salt air, and humidity are part of the equation, and so is the existing palette of the neighborhood. In Oakland Park, we see a lot of coastal and Mediterranean-inspired homes, many with stucco exteriors in white, sand, and warm gray tones.

White and Almond are the workhorses. They disappear on most stucco homes and keep a clean, bright look from the street. Tan blends well on homes with earthier stucco or stone accents. Bronze and Black make a stronger architectural statement and look sharp on modern or contemporary builds, especially paired with darker exterior trim or metal roof accents. Black and bronze frames also absorb more heat in direct sun, which is worth considering for west-facing walls.

On the glass side, clear glass gives you maximum natural light and an unobstructed view. Tinted glass cuts glare and reduces heat before it enters the home, which helps in rooms with large glass areas. Low-E insulated glass is the energy performer, reflecting heat while still letting daylight through. Every glass option starts with a laminated impact layer when you’re ordering an impact-rated awning window, because the storm protection comes from the PVB interlayer, not from the glass tint or coating.

Installation by TruePane Windows & Doors in Oakland Park

Installation makes or breaks an impact window. The NOA rating belongs to the window as tested and installed. If the frame is set out of square, shimmed wrong, or sealed with the wrong materials, the system does not perform the way it was approved to perform. We treat this as the most important part of the job.

Every TruePane Windows & Doors installation in Oakland Park starts with a pre-install inspection of the opening. We check the rough opening dimensions, the condition of the surrounding framing, and whether the existing flashing or water-resistive barrier needs repair before the new window goes in. Then we set the window level, plumb, and square, anchored per the manufacturer’s approved installation method. We follow AAMA 2400 and 2410 practice for installation and use AAMA 812 low-expansion foam perimeter sealant. Low-expansion foam matters because it fills the perimeter gap without bowing the frame, and it seals against air and water intrusion without putting pressure on the extrusion.

After the window is anchored and sealed, we run a water test on the installation, clean up the site, and walk you through what was installed. For Oakland Park specifically, we’re mindful of coastal exposure and proximity to salt air. Homes east of Dixie Highway see more corrosion potential than homes further inland, so we pay attention to fastener selection and flashing details. We’re also familiar with Broward County’s HVHZ permitting requirements, including when a Miami-Dade NOA or Florida Product Approval submittal needs to accompany the permit application. Improper installation compromises the approval. That’s the whole reason we install what we sell, with our own crew, and why we document the work as we go. Call (863) 264-3649 to talk through your project.

Frequently Asked Questions - Awning Windows

Get a Quote - Awning Windows in Oakland Park

TruePane Windows & Doors supplies and installs impact-rated awning windows across Oakland Park and Broward County. If you’re replacing jalousies, upgrading a room that needs ventilation, or planning a full window replacement, we’ll measure the openings, confirm your wind zone, and quote the configuration that fits. Call (863) 264-3649 to schedule your free on-site measurement.

Written by the team at TruePane Windows & Doors, serving Oakland Park, FL with impact-rated window and door installations.