Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
French & Double Doors in Oakland Park, FL | TruePane Windows & Doors
French and double doors bring something to a Florida home that a single door can’t: wide, symmetrical openings that connect interior living space to patios, lanais, and backyards while still holding up to hurricane season. At TruePane Windows & Doors, we sell and install paired impact-rated French doors with laminated glass in every lite, and we’ve been doing it across Oakland Park long enough to know which configurations actually work in this wind zone. Whether you’re replacing rotted French doors on a 1960s ranch near Lloyd Estates or finishing new construction off Prospect Road, we spec every opening for the right design pressure and we install it to HVHZ standards. Call (863) 264-3649 to talk through your opening.
Product Overview - French & Double Doors
Paired impact-rated French doors with laminated glass in every lite offer symmetrical sightlines and multi-point locking hardware for interior-to-exterior openings. That’s a mouthful, so let’s break it down. You get two doors that meet in the middle, each with glass panels that hold together under impact instead of shattering into your living room. The hardware locks at multiple points along the frame, not just at the handle, which means the doors stay shut and sealed when wind pressure tries to flex them open.
In Oakland Park, where a summer afternoon can turn into a wind event in hours, this product category earns its keep. The paired-door format suits Florida architecture well: wide openings onto covered patios, pool decks, and garden spaces are standard in homes from Coral Ridge Isles down to North Andrews Gardens. What makes our French and double doors different from what you’d find at a big-box supplier is the impact-rated glazing and the frame engineering behind it. We source from PGT, CGI, CWS, ES Windows, ECO, and Mr-Glass because those manufacturers design specifically for the Florida market, not for a national catalog. The frames come in aluminum or vinyl, both engineered to carry laminated glass and multi-point hardware without sagging over time.
These doors work for single-family homes, duplexes, and the occasional low-rise condo conversion where the association allows owner-installed doors. If your opening is up to 96 inches wide, you likely have options. The key is matching the pair to your specific exposure, and that’s where our Oakland Park team comes in.
Technical Specifications
Here’s what you can expect from this product line in plain terms:
- Frame materials: Aluminum or vinyl. Aluminum gives you thinner sightlines and the option for darker finishes that hold up in direct sun. Vinyl runs cooler to the touch and suits tighter budgets on protected openings.
- Maximum size: Up to 96 inches wide across the pair. Individual panel widths and heights vary by configuration.
- Glass options: Laminated impact glass with a PVB interlayer, Low-E insulated glass for energy performance, tinted glass for glare and heat, and clear glass for maximum light transmission.
- Finish options: White, almond, bronze, black, and tan. Color-matched hardware available on most configurations.
- Hardware: Multi-point locking with top, bottom, and center latching points. Handle styles vary by line and finish.
- Sill options: Raised or flush sills depending on threshold height and drainage requirements.
Every configuration carries specific Miami-Dade NOA and Florida Product Approval documentation, which we pull for your permit submittal.
Hurricane & Compliance Performance
Laminated Impact Glass
Each lite carries a PVB interlayer that holds the glass in the frame under impact. The glass may crack, but it stays bonded to that plastic layer instead of blowing into your home. That’s the core difference between impact-rated French doors and decorative interior French doors with standard annealed glass.
Miami-Dade NOA / FL Product Approval
Every TruePane French and double door configuration carries Miami-Dade NOA and Florida Product Approval numbers. These are issued per configuration, so we verify the exact numbers on your specific quote before you sign. No generic claims. Your permit reviewer will see the actual approval for your exact size, glass, and frame combination.
FBC / HVHZ Compliance
This product is engineered to Florida Building Code High-Velocity Hurricane Zone requirements. Oakland Park sits within the HVHZ map, which means the building department will check for this. Our doors are designed for it from the first line on the cut sheet, not adapted to it after the fact.
TAS 201 / 202 / 203 Testing Context
Protocol family for HVHZ-rated products includes TAS 201 for large-missile impact, TAS 202 for cyclic wind-pressure loading, and TAS 203 for forced-entry resistance. These three tests simulate what a real storm does: debris hits the door, wind buffets it repeatedly, and intruders try to force it. Your French door passes all three or it doesn’t carry the NOA.
Design Pressure for Your Wind Zone
We match design pressures to your wind zone, up to +/-100, never higher. That “never higher” matters. Over-specifying a door wastes your money, and under-specifying fails inspection. We look at your opening location, surrounding structures, and local code requirements before we recommend a specific DP rating.
Energy Performance
Low-E and insulated glass options are available for these doors. If your French doors face west or south in Oakland Park, a Low-E insulated lite cuts heat gain without changing the look. Clear laminated glass still meets impact code, but it won’t do much for your cooling bill.
Color & Glass Options
White and almond frames dominate Oakland Park’s older ranch homes and mid-century builds, and for good reason. They match existing windows and keep a clean, understated look. Bronze and black frames have gained ground in the last decade, especially on Mediterranean and contemporary homes east of Dixie Highway where darker trim already exists. Tan lands somewhere between: warm enough for terra cotta exteriors, neutral enough not to fight landscaping.
On the glass side, clear laminated impact glass gives you the brightest interior and the truest color through the pane. Tinted glass drops glare and heat before it enters the room, which matters for west-facing lanais. Low-E insulated glass is the pick for air-conditioned rooms that open directly through these doors, since it carries a thermal break between panes. If you’re unsure, we’ll show you samples in your home, in your actual light, before you pick. That’s the only way to judge glass and frame color honestly.
Installation by TruePane Windows & Doors in Oakland Park
An impact-rated French door is only as good as its installation. We’ve pulled failed doors out of Oakland Park homes where the product itself carried a valid NOA, but the install was so far out of level that the multi-point hardware no longer aligned, and the laminated glass was carrying structural load it was never designed for. That’s why we install the way we do.
Our process starts with a pre-install inspection of the rough opening. We check the framing for rot, the header for deflection, and the subfloor for level. If the opening isn’t square, we correct it before the door ever comes off the truck. Then we set the frame level, plumb, and square, shimming at the anchor points, not just at the corners. We seal the perimeter with AAMA 812 low-expansion foam, which fills gaps without bowing the frame. Flashing and sill pan details follow AAMA 2400/2410 practice for water management. Then we cycle every lite, test the multi-point hardware, and run a water test on the sill and threshold before we call it done.
Oakland Park sits in a wind-borne debris region, which means the building department will ask for product approvals on your permit. We handle that paperwork as part of the job. We know what the local reviewers look for, and we submit the exact NOA pages for your configuration the first time. Permitting awareness isn’t an add-on here, it’s part of doing the job correctly.
Frequently Asked Questions - French & Double Doors
Design pressures are matched to your wind zone, up to +/-100. Your exact DP rating depends on your home’s location in Oakland Park, the door’s placement on the structure, and the glass configuration you choose. We calculate this for your specific opening when we quote.
Lead times vary by manufacturer and configuration, but most French and double door pairs land in 6 to 10 weeks from order to install. Custom sizes, dark finishes, and Low-E insulated glass tend to push toward the longer end. We’ll give you a realistic window when we quote, not an optimistic one.
Yes. Oakland Park building officials will ask for approval documentation for any impact-rated exterior door. We provide the exact NOA and FL Product Approval pages for your configuration as part of your quote, and we handle the permit submittal so the paperwork matches the product on site.
Most configurations are available in custom widths and heights within the 96-inch maximum span. You can specify which panel is active (the one that opens daily) versus fixed, the swing direction, and the hardware finish. Some lines offer unequal panel splits for openings where one side needs to stay mostly closed.
Rinse the tracks and sill channels with fresh water every few months, especially if your doors face a salt-exposed area of Oakland Park. Wipe the multi-point hardware with a dry cloth and re-lubricate the locking points annually with a dry silicone spray. Don’t pressure-wash the glass or frames. Leave the weep holes clear so water drains the way the design intends.
Get a Quote - French & Double Doors in Oakland Park
If you’re planning a French door project in Oakland Park, the next step is a free on-site measurement. We’ll check your opening, talk through glass and finish options, and put a written line-item quote in your hands. Call (863) 264-3649 to schedule yours.
Written by the team at TruePane Windows & Doors, serving Oakland Park homeowners and builders with impact-rated doors and professional HVHZ-compliant installation.
Six Reasons Homeowners Choose TruePane Windows & Doors
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.
Other TruePane Windows & Doors Services
What Neighbors Say About TruePane Windows & Doors
Detailed Images



Before
After
Before
After
Before
After