Door Installation in Wilton Manors - Free In-Home Measure, Written Price

Fast, Reliable Door Installation Across Wilton Manors

A new entry door for a Wilton Manors home usually runs between $1,800 and $5,400 installed, and the job takes one day for most masonry-block bungalows. The wildcard in Wilton Manors is the opening itself: the original CBS construction from the 1940s through 1960s produced rough openings that were never standard, so a door that slides into a Plantation townhouse will not drop into a Wilton Drive ranch without saw work. TruePane Windows & Doors handles that masonry step in-house. We do not sub it out, and we do not hide it in the estimate as a surprise line item. If you are pricing an entry, French, bifold, or pivot door in Wilton Manors, call (863) 264-3649 and we will give you a written line-item quote that accounts for your actual opening, not a guess from a supply-house catalog.

Why TruePane Windows & Doors Is Wilton Manors’s Preferred Door Installation Company

TruePane is led by Dale Kessler, a second-generation glazier who built this company in 2008 around a rule that still hangs on the whiteboard: if the pane is not true, the job is not done. That standard applies to every door we set in Wilton Manors, from a screened storm door on NE 26th Street to a custom pivot door on a riverfront lot off NE 28th Drive. We have worked on the CBS bungalows, the mid-century ranch homes, and the newer townhome clusters near the south end of the city. The local work taught us what Wilton Manors doors actually fail on: salt-air hinges, non-standard concrete openings, HOA finish requirements, and impact-code enforcement after storm inspections. We are background-checked, uniformed, and we arrive when we say. A live person answers the phone 24 hours a day, seven days a week at (863) 264-3649. No voicemail tree, no regional call center.

Our Door Installation Services in Wilton Manors

Our Door Installation team handles the full range of door work Wilton Manors homeowners call us for. Four services make up most of our local volume.

Entry & Swing Doors

Entry doors in Wilton Manors take more abuse than most of South Florida assumes. The original CBS bungalows have door openings that were cast directly into concrete block at whatever dimension the mason had on hand. A standard pre-hung door will not seat, and that is where we start: measuring the rough opening twice, cutting back block where needed, and building out the jamb so the door swings true. We install impact-rated fiberglass, steel, and wood-look entry doors that meet Broward County’s Florida Product Approval requirements. The salt air near the Middle River means we default to stainless steel hinges and threshold screws. Galvanized hardware fails within five years on east-facing doors; we do not install it there.

Double & French Doors

French doors open up the back of a Wilton Manors home to a patio, a garden, or a canal view. The older masonry homes often have two jalousie-clad openings side by side, and homeowners ask us to convert those into a single framed French-door unit. That conversion involves cutting the concrete mullion between openings, flashing the new header, and setting a fusion-welded frame that will not rack when the slab shifts. On newer townhomes, we often replace builder-grade double doors with impact-rated units that carry both manufacturer warranty layers registered in writing before we leave the driveway. We stock weatherstripping and sill pans sized for Broward’s mid-day downpours.

Bifold & Folding Doors

Bifold and multi-panel folding doors are common in Wilton Manors when owners want to open an entire wall of a ranch or a modern addition to the yard. The critical step locally is the header and track, not the panels. Wilton Manors homes sit on sandy, shifting soil near the water, and a folding-door header that deflects even a quarter inch will bind the panels within a year. We size the header for the span, anchor the track to the block with epoxy-set anchors, and flash the sill with butyl tape. The result opens and closes with one hand, even in August humidity.

Pivot Doors

A pivot door makes a statement on a mid-century-modern Wilton Manors home, and there are a number of those along the Middle River. The pivot hinge carries the entire weight of the slab, so the framing has to be right. We cut back the concrete opening, build a steel-reinforced jamb, and set the pivot points at the exact top and bottom alignment. Salt-air corrosion is the enemy of exposed pivot hardware near the water, so we specify marine-grade stainless for riverfront properties. A pivot door done wrong sags within a season and scrapes the threshold every time you open it. We stand behind it with our Done Right Promise.

Impact-Rated Door Retrofit for Jalousie Openings

Wilton Manors has more jalousie doors than almost any city we work in. These original louvered glass doors provided cross-breeze before central air conditioning was standard, but they do not meet Broward County’s post-Hurricane Andrew impact requirements. The opening behind the jalousie frame is almost never a standard dimension, and the block around it is often spalled from decades of salt and moisture. We remove the old jalousie assembly, saw back the rough opening to accept a modern impact-rated door, patch the block with proper bonding material, and install a door that closes the way code requires. The mid-century look does not have to disappear. We install impact-rated wood-look fiberglass doors and custom doors with period-correct lites so the house reads like 1959 from the street and performs like 2026 in a storm.

Arched & Custom Doors

Wilton Manors’ MCM restoration culture is unusually active. Homeowners along NE 28th Drive, around Wilton Drive, and near the south canals want impact-rated replacements that honor flat-roof, mid-century lines, not vinyl sliders from a big-box aisle. We fabricate arched doors, round-top entry doors, and custom-height doors to match the original architectural drawings when the owner has them, or to match the remaining evidence in the masonry when they do not. Custom doors in Wilton Manors run $3,200 to $9,800 depending on the species, the glass package, and the hardware. We quote manufacturer lines side by side on paper, including Andersen, Pella, Marvin, so the homeowner sees exactly what each dollar buys.

Trusted Brands We Service in Wilton Manors

TruePane is an authorized installer for more than a dozen manufacturer lines, and for Wilton Manors customers we keep stock depth in the brands that make sense for this market:. Andersen and Pella produce wood-look impact-rated entry doors that satisfy HOA finish requirements on newer townhome clusters. Marvin makes strong custom door systems for the larger mid-century lots. ViewLux is our pick for homeowners who want a modern aluminum line with clean sightlines that works on both new construction and renovated CBS homes. Because we service and install these lines regularly in Wilton Manors, we carry local parts and can resolve warranty claims faster than an installer who just reads the catalog. Every door we set gets both manufacturer warranty layers registered in writing, with durations stated, before the truck leaves the driveway. That is The Keystone Standard, and it is not optional on our jobs.

Common Door Installation Problems We See in Wilton Manors Homes

• Builder-grade sills failing on newer townhomes. The master-planned pockets near the south end of Wilton Manors went up fast, and many original door sills were never flashed correctly. The first mid-day downpour of summer wicks water into the slab, and the tile inside the entry starts to cup within three years. We replace the sill, flash the opening with butyl tape, and re-hang the door so it drains outward, not inward.
• Salt-air corrosion on east-facing doors. Wilton Manors sits about 3.5 miles from the Atlantic and is threaded with canals and the Middle River. Hinges and threshold screws on east-facing doors corrode to the point of drag or complete misalignment within five years. We default to stainless hardware on any door that has salt exposure, which is most of them east of Andrews Avenue.
• HOA-required wood-look doors without impact-rated cores. Several newer townhome communities require wood-look entry doors for architectural consistency. Owners often discover the original builder doors look right but lack an impact-rated core, so they fail storm inspection. We replace them with impact-rated wood-look doors that pass code and keep the HOA approval paperwork clean.
• Non-standard rough openings in CBS bungalows. The original jalousie and slab-door openings in Wilton Manors bungalows were cast into concrete block at whatever dimension the mason laid that day. A standard pre-hung door will not fit, and we spend more time with a masonry saw and a patch in Wilton Manors than we ever do in the drywall-framed new construction just west of here.

Pricing for Door Installation in Wilton Manors, FL

We Also Serve Cities Near Wilton Manors

Our Door Installation crews work throughout the corridor around Wilton Manors, and many of our customers find us from Oakland Park, Fort Lauderdale, Lauderdale Lakes, and Lauderdale-by-the-Sea. If you are reading this from a neighboring city, the masonry and salt-air experience we built in Wilton Manors transfers directly to your block. For full details on our work across this part of Broward County, see Door Installation in Wilton Manors or call us at (863) 264-3649.

FAQs - Door Installation in Wilton Manors

Do I need an HOA approval for a new entry door in Wilton Manors’ newer townhome communities?

Yes, in most of the newer townhome developments near the south end of Wilton Manors you need written approval from your HOA before the door face, finish, or hardware changes. Most boards require the door to match the community’s architectural standard, and some have a short list of approved door styles. We help you complete the approval form and provide the manufacturer spec sheet and impact-rating documentation the board will ask for. That paperwork is included in the quote, not billed as an extra. Call (863) 264-3649 and we will walk you through the process for your specific community.

What’s the right impact door for a Wilton Manors mid-century CBS bungalow that still looks period-correct?

An impact-rated wood-look fiberglass door with a period-correct lite pattern is the best fit for most Wilton Manors bungalows. You get the flat-panel, mid-century look without the maintenance of real wood in salt air, and the impact-rated core passes Broward County’s storm-code inspection. We keep Andersen and Pella wood-look lines in our Wilton Manors stock depth for this exact reason. If your home is a true MCM restoration, we can also fabricate a custom arched door that matches your original drawing. Call (863) 264-3649 and we will bring samples to your door.

Why does my builder-installed double door on a newer Wilton Manors townhome already have a gap at the top?

The gap at the top of your double door usually means the header or the jamb has moved, and in Wilton Manors the cause is often a poorly flashed sill that let moisture into the rough opening and swelled the framing. Newer townhomes in this city went up fast, and builder-grade doors were frequently set without proper flashing. We remove the doors, correct the header alignment, flash the opening properly, and re-hang the doors so they close tight at all four corners. Call (863) 264-3649 and we will take a look and tell you exactly what is moving and why.

Can I convert a jalousie-clad back porch door into a modern French door without ruining my CBS wall?

Yes, and we do this regularly in Wilton Manors. The jalousie door opening is cut into the concrete block, so we saw back the rough opening, build the new jamb into the block, and install a fusion-welded French door unit that meets impact code. The exterior retains the clean stucco line of the original wall, and the new door drains correctly instead of letting rain into the slab. We have done this conversion on NE 28th Drive and around the canal streets south of Wilton Drive. Call (863) 264-3649 for a free estimate on your exact opening.

How does salt air near the Middle River affect a new pivot door in Wilton Manors?

Salt air near the Middle River corrodes exposed pivot hardware faster than almost anything else in Wilton Manors. Hinges, threshold screws, and the pivot mechanism itself need to be marine-grade stainless or they will pit and bind within three to five years. We specify marine-grade hardware on any pivot door set on a riverfront or canal lot, and we flash the sill so salt-laden moisture never reaches the anchoring points. A pivot door with standard hardware looks fine for a year and then starts to rasp. We do not install it that way. Call (863) 264-3649 and we will quote the right hardware for your exposure.

Get Your Wilton Manors Door Installation Estimate

We know Wilton Manors homes because we have worked on them: the CBS bungalows with non-standard openings, the townhomes with HOA finish rules, the MCM restorations that need an arched door, not a slider. Dale Kessler runs TruePane on a simple rule: if the pane is not true, the job is not done. That rule applies to every jamb we set and every sill we flash in this city. Call (863) 264-3649 and a live person will answer. We will schedule your free estimate, bring manufacturer samples, and give you a written line-item quote in plain language. No surprises, no change orders, no arguing about warranty coverage later. Done right, in writing, and stood behind for 90 days. That is the standard we have kept since 2008 of community service.

Written by Dale Kessler, Owner at TruePane Windows & Doors, serving Wilton Manors and surrounding Broward County communities.