Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Sliding glass doors
Impact garage doorsPGTCGI
Before
After
Before
After
Before
AfterFast, Reliable Energy-Efficient Windows Across Sunrise
Energy-efficient window replacement in Sunrise runs $850 to $2,400 per opening for full-frame tear-out work with HVHZ-rated impact units, and most homes need 6 to 14 openings replaced. The number that matters more than the window itself is the product approval attached to it. If you live anywhere in Sunrise, a window with a generic Florida Product Approval but no Miami-Dade NOA or HVHZ designation will fail inspection. Not sometimes. Every time.
TruePane Window Installation in Sunrise has replaced windows across Sunrise Golf Village, Springtree, and the condo corridors off University Drive for years. We know what the Broward County inspectors look for at rough and final, and we know which units carry the right paper before we order them. Call (863) 264-3649 and a live person answers. We’ll walk you through your options and schedule a free estimate at your home.
Why TruePane Windows & Doors Is Sunrise’s Preferred Energy-Efficient Windows Company
We’ve pulled more rotted, salt-corroded aluminum frames out of Custom Windows & Doors in Sunrise homes than we can count. The houses here were built for a different climate era, and it shows in the window openings. Single-pane sliders with pitted frames. Jalousie glass that leaks air like a screen door. Fogged seals from vinyl that warped under Broward County’s UV load. Sunrise homeowners don’t need a lecture on energy efficiency. They need someone who knows which replacement window will survive this climate and pass this county’s inspection.
Our crew recently pulled rotted aluminum sliders from a 1978 CBS ranch in Sunrise Golf Village and found the frames so corroded by salt air that the sashes had seized in their jambs. We installed HVHZ-rated impact casements with low-E glass and argon fill, and the owner’s insurance carrier removed the wind-mitigation surcharge at the next renewal. That’s the kind of outcome we aim for on every Sunrise job. The Energy-Efficient Windows work we do here always starts with a careful look at the existing opening, not a catalog page.
Dale Kessler founded TruePane in 2008, but the trade knowledge behind the company goes back many years. We hire local, train apprentices into journeymen, and send background-checked, uniformed technicians to every home. When we quote a job in Sunrise, we measure twice, put the manufacturer lines side by side on paper, and register both warranty layers before the truck leaves your driveway. The Done Right Promise backs every install. If the pane is not true, the job is not done.
Our Energy-Efficient Windows Services in Sunrise
Low-E & Argon Gas Glass
A low-E coating reflects heat back toward its source. In a Sunrise summer, that means the coating faces outward and keeps the worst of the afternoon heat from pressing through the glass. Argon gas between the panes slows heat transfer further, but only if the seal holds. We’ve seen Sunrise homes where the argon leaked out years ago and the homeowner only noticed because the electric bill crept up. If your windows have a metallic film peeling or you feel heat radiating through the glass at 3 p.m., the gas is probably gone. Replacing that glass with fresh low-E and argon-filled units changes how the room feels within a day.
ENERGY STAR Replacement Windows
ENERGY STAR certification for South Florida is tied to the Southern Climate Zone, which scores windows on solar heat gain coefficient as much as U-factor. A window that earns the label in Minnesota won’t necessarily hold up the same way here. Our Sunrise customers get units certified for our zone and our county, which means they carry the right Florida Product Approval and Miami-Dade NOA to pass inspection. We don’t order a single unit for a Sunrise home without checking the NOA listing first.
Double & Triple Pane Windows
Double-pane windows are the standard energy upgrade for most our Glass Railing Systems in Sunrise homes. Two panes with a gas fill and a warm-edge spacer deliver the comfort boost most homeowners want. Triple pane is worth a harder look if you’re on the west side of Sunrise near Sawgrass Mills or the Everglades edge, where late afternoon sun hits hard and indoor temperatures climb. The third pane adds cost but cuts heat gain measurably. We’ll quote both options on the same paper so you can see the dollars and the performance side by side.
UV-Blocking & Fade Protection
Broward County gets more than 240 sunny days a year. The UV radiation that comes with those days fades upholstery, hardwoods, and artwork at a pace homeowners in other states don’t experience. Sunrise homes with east- and west-facing windows see the worst of it. Low-E coatings with UV-blocking properties cut that fade dramatically. If you’ve watched a couch lose its color after three years in front of a Sunrise living room window, the upgrade pays for itself in furniture you don’t replace.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Sunrise
TruePane is an authorized installer for more than a dozen manufacturer lines, including PGT, CGI, and ES Windows. PGT and CGI build Miami-Dade NOA-listed impact windows specifically for the South Florida market, which matters in Sunrise because the county inspector checks that listing before anything else. ES Windows makes a strong aluminum thermally-broken line for coastal homes. We quote these brands side by side on paper for every Sunrise job, so you see exactly what you’re buying and what each line costs. Stocking parts for these brands locally means we’re not waiting on a distributor in another state when a warranty part is needed.
Common Energy-Efficient Windows Problems We See in Sunrise Homes
- Salt-corroded aluminum frames. Pre-1994 Sunrise homes were built with single-pane aluminum windows, and the salt-laden air off the Atlantic pits and corrodes those frames over the decades. Sashes bind in their jambs, lock hardware fails, and the window stops functioning before it ever gets an energy-efficiency score.
- Fogged glass from failed seals. The intense Broward County heat and UV load breaks down the seals on older vinyl and aluminum windows. When you see fog between the panes, the insulating gas has escaped and the window is performing at a fraction of its original rating. That fog is not a cleaning issue. It’s a seal failure.
- Jalousie and non-impact sliders. Sunrise has a large inventory of 1960s through 1980s homes still fitted with jalousie windows and non-impact aluminum sliders. These leak air constantly and offer almost no thermal resistance. Under HVHZ rules, they also can’t simply be repaired with glass replacement. Full-frame replacement with rated impact units is the standard scope.
- Wrong-product installs failing inspection. We’ve arrived at Sunrise homes where another contractor installed units with a generic Florida Product Approval and no Miami-Dade NOA. The county inspector red-tagged the job at rough. Homeowners were left with boarded-up openings and a re-order that took weeks. That’s the exact mistake this page is built to help you avoid.
Pricing for Energy-Efficient Windows in Sunrise, FL
A typical full-frame replacement in Sunrise runs $850 to $2,400 per opening, depending on the window size, frame material, glass package, and product approval rating. Low-E double-pane impact windows in standard sizes run $1,100 to $1,800 per opening installed. Triple-pane upgrades add $300 to $600 per window. Jalousie tear-outs with full replacements run $1,400 to $2,400 per opening because the wall opening usually needs reframing. A full home replacement of 8 to 12 windows in Sunrise typically lands between $10,000 and $28,000.
Here are the line items we put on every Sunrise quote:
- Full-frame tear-out and disposal of old aluminum or jalousie units: $200 to $400 per opening
- HVHZ-rated impact window (PGT, CGI, ES Windows): $500 to $1,200 per unit
- Low-E + argon glass upgrade: $120 to $280 per unit
- Interior trim and exterior caulking to inspection standard: $80 to $160 per opening
- Permit package and final inspection coordination: $150 to $400 flat
We quote the job in writing, with both warranty layers registered before we leave your driveway. No change orders. No surprise line items. Call (863) 264-3649 for a free estimate on your Sunrise home.
We Also Serve Cities Near Sunrise
Our crews work across Broward County, including Oakland Park, Fort Lauderdale, Wilton Manors, and Lauderdale Lakes. If your house sits near Sunrise Boulevard or the Sawgrass Expressway, we’re already in the neighborhood. Energy-Efficient Windows in Sunrise is our core service area, but we regularly run jobs within twenty minutes of University Drive in every direction. Same standard, same warranties, same inspection guarantee.
Serving Sunrise, FL - Our Local Coverage Area
We’re based in the Sunrise area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Energy-Efficient Windows in Sunrise
Because Sunrise sits inside Broward County’s High Velocity Hurricane Zone, and Broward inspectors enforce that designation at rough and final inspection. A window with a Florida Product Approval but no explicit HVHZ or Miami-Dade NOA listing will fail, even if it meets the underlying test standard. Contractors who don’t work in Broward County regularly miss this distinction and get their customers’ jobs red-tagged. We only quote NOA-listed product for Sunrise jobs. Call (863) 264-3649 and ask us to show you the NOA listing for any window we propose.
Jalousie windows cannot be effectively upgraded for energy performance. The individual glass slats don’t seal tightly against each other, and the frames leak air continuously. Under current Broward County code, a jalousie opening in a Sunrise condo must be fully replaced with a rated impact unit to pass inspection. The scope usually involves cutting out the old jalousie frame, re-framing the opening to a standard size, and installing an HVHZ-listed impact window. Most Sunrise condo associations also have architectural guidelines that require a specific window style or color, and we’ll coordinate that paperwork for you. Get a fixed quote in writing by calling (863) 264-3649.
Yes, and on a Sunrise home with original pre-1994 aluminum windows, the drop is usually visible on the first full billing cycle after install. Single-pane aluminum transfers heat directly into the living space. A dual-pane low-E impact window blocks a large share of that heat gain, especially on east- and west-facing openings. Most Sunrise customers we replace windows for report a 15 to 30 percent reduction on summer cooling costs. The exact number depends on your home orientation, insulation, and AC condition, but the savings compound every month. Call (863) 264-3649 for a free estimate and we’ll give you a straight answer based on your actual windows.
Fog between the panes means the seal has failed and the insulating gas has escaped. The window is no longer performing at its rated efficiency, and the only real fix is replacing the glass or the entire sash. Sunrise’s heat and UV load accelerates seal failure, especially on vinyl windows without fusion-welded corners that warp in the sun. Once the seal goes, the fog will come and go with humidity but it never clears permanently. We replace failed glass with new low-E, argon-filled units every week in Sunrise. Call (863) 264-3649 and we’ll inspect your fogged windows free of charge.
Yes, every window replacement in Sunrise requires a building permit, and most exterior opening changes also require an HVHZ product approval on file with the city. That means your window and door choices are limited to units carrying a Miami-Dade NOA or explicit HVHZ designation. We pull the permit, schedule the rough and final inspections, and stand behind the install until the inspector signs off. That’s the Done Right Promise in action. Call (863) 264-3649 and we’ll walk you through the permit process for your specific Sunrise home.
Contact TruePane Windows & Doors in Sunrise
If you live in Sunrise and you’re tired of hot rooms, fogged glass, or windows that bind every July, we’re ready to help. We’ll measure, quote in writing, and register both warranty layers before the truck leaves your driveway. The Done Right Promise covers every job, and Dale Kessler stands behind the company name. Call (863) 264-3649 today for your free estimate. We answer live, every time.
Written by Dale Kessler, Owner at TruePane Windows & Doors.
Six Reasons Homeowners Choose TruePane Windows & Doors
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.