Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Fast, Reliable Window Replacement Across Lighthouse Point
Window replacement in Lighthouse Point means solving two problems at once: frames and tracks that corrode years faster from salt air, and openings that must meet Broward County’s High Velocity Hurricane Zone code. A standard inland window won’t do either. We’ve replaced corroded-shut sliders on NE 31st Court, rebuilt weeping frame corners on canal-front ranches, and pulled original 1960s jalousies that barely held a pane, let alone a wind load. If you’re looking at failed seals, seized tracks, or windows that rattle during a summer squall, call (863) 264-3649. We’ll give you a straight answer and a written quote.
Why TruePane Windows & Doors Is Lighthouse Point’s Preferred Window Replacement Company
We’ve been at this since 2008, and Dale Kessler, our founder, still runs the company by one rule: if the pane is not true, the job is not done. That standard travels to every Lighthouse Point canal-front home and every 1950s ranch we walk into. The homes here are not like inland Broward. Most were built with single-pane aluminum jalousies and horizontal sliders that were never meant to face salt spray, and nearly every original rear slider we open is corroded at the weep holes or seized in the track. We know that before we ever put a tape measure on the opening.
Lighthouse Point homeowners call us because we answer the phone. Not a voicemail tree, not a callback form. A live person, 24 hours a day, 7 days a week. Our technicians are background-checked and uniformed, and they work in your home the way they’d work in their own mother’s. That’s not a slogan. It’s a hiring standard we’ve held since 2008.
Every job is covered by the Done Right Promise and The Keystone Standard: both manufacturer warranty layers registered in writing before the truck leaves your driveway, with durations stated. No fine print that covers neither. No arguing. If we didn’t do it right, we make it right.
Our Window Replacement Services in Lighthouse Point
Most homes in Lighthouse Point need more than a glass swap. The original frames are often pitted, the tracks seized, the seals gone. Below are the services we perform most often here, with what each one actually involves.
Full Frame Replacement
This is the most common job we do in Lighthouse Point, and it’s usually for one reason: the original aluminum frame has corroded past the point where an insert would hold. On canal-facing elevations especially, weep holes pit white within 5 to 7 years, and the frame corners lose structural integrity. Full frame replacement lets us remove the old extrusion entirely, inspect the rough opening for rot, and set a new marine-grade or impact-rated frame that’s anchored to current HVHZ code. It’s the difference between treating the symptom and fixing the opening for another 30 years.

Insert Window Replacement
An insert window, sometimes called a pocket replacement, fits a new sash and frame inside the existing opening without disturbing trim or drywall. It’s a good fit in Lighthouse Point when the original frame is still square and free of deep corrosion. But here’s the honest part: many canal-side openings aren’t. Salt exposure eats the frame from the weep holes inward, and an insert set into corroded aluminum just transfers the failure. We’ll tell you on the first visit whether the opening can take an insert or needs full frame work. We won’t sell you an insert into a frame we wouldn’t put in our own house.

Storm Window Replacement
Storm windows in Lighthouse Point carry a different meaning than further north. Here the concern is wind-driven rain, salt spray, and hurricane-force gusts, not snow. We replace and retrofit storm-rated glazing systems where the original protective layer has failed or where homeowners want a secondary barrier before committing to full impact windows. Given the HVHZ requirement, most storm window projects here end up in a conversation about impact-rated primaries anyway. We’ll lay out both options side by side on paper so you can see the cost difference and the insurance implications before you sign.

Energy-Efficient Upgrade
The 1950s and 1960s ranchers here were built with single-pane jalousies that leak conditioned air year-round. In a Lighthouse Point July, that’s not a comfort problem, it’s a permanent load on your air conditioner. We replace those with insulated glass units, low-E coatings, and fusion-welded frames that hold the argon fill for the life of the window. The difference in your electric bill is real, and the difference in how the house holds temperature during the afternoon heat is noticeable by the first weekend.

What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Lighthouse Point
We’re an authorized installer for more than a dozen manufacturer lines, but for Lighthouse Point specifically we lean on brands that hold up to salt exposure. Andersen, Pella, and Marvin frames with marine-grade finishes are the ones we quote most often here, along with impact-rated PGT and CGI lines for canal-facing elevations. The frame material and hardware matter more than the glass spec in this city. We’ll quote manufacturer lines side by side on paper so you see exactly what you’re paying for, and we register both warranty layers before our truck leaves your driveway.
Common Window Replacement Problems We See in Lighthouse Point Homes
- Corroded weep holes and pitted frame corners. Fusion-welded aluminum frames develop white, powdery corrosion at the weep holes within 5 to 7 years of salt-air exposure near the canals. Once weeping through the frame begins, jamb rot and seal failure follow, and the window often can’t be saved with an insert.
- Seized horizontal-slider tracks on lanai doors. The rear sliders on 1960s and 70s canal-front homes bear the brunt of the prevailing east-southeast wind fetch. Aluminum oxidation binds the track, making the door impossible to open, which is both an egress issue and a storm vulnerability.
- Lost argon fill and fogged glass on impact windows. Foam weatherstripping and standard stainless fasteners degrade faster than the glazing itself. The glass looks fine, but the insulated unit has lost its fill, and the window no longer performs against heat or wind the way the sticker claimed.
- Non-compliant original jalousies and sliders. Most original 1950s through 1970s units in Lighthouse Point were never rated for HVHZ wind loads. They’re uninsurable and unpermittable on any renovation, which means even a simple repair often triggers a full replacement conversation.
Pricing for Window Replacement in Lighthouse Point, FL
Here’s the honest math. A standard inland-spec insert window might run $450 to $750 per opening installed. The coastal-spec version of that same opening, built with marine-grade aluminum or impact-rated frame and stainless hardware, runs $800 to $1,400 per opening. Full frame replacement on a canal-facing elevation starts around $1,200 per opening and climbs with size, glazing spec, and whether the rough opening needs repair. A rear lanai slider replacement, the single highest-volume line item on any Lighthouse Point estimate sheet, typically lands between $3,500 and $7,500 depending on width, impact rating, and framing condition.
The gap between inland-spec and coastal-spec is the cost of not doing this twice. A cheap inland frame in Lighthouse Point shows pitting and seal failure within a decade. That’s a second replacement, plus the labor, plus the permit. Pay the coastal-spec once, or pay the inland-spec twice. Call (863) 264-3649 for a written quote. The estimate is free, and we’ll show you the line items.
We Also Serve Cities Near Lighthouse Point
Our crews regularly work Oakland Park, Fort Lauderdale, Wilton Manors, and Lauderdale Lakes, bringing the same Window Replacement standards and The Keystone Standard to every job. If you’re in one of those cities and want the coastal-spec conversation without the runaround, call us at (863) 264-3649. We’ll schedule the estimate and show up when we say we will.
For a closer look at how we serve this specific community, see Window Replacement in Lighthouse Point or reach out directly to talk about your openings.
Serving Lighthouse Point, FL - Our Local Coverage Area
We’re based in the Lighthouse Point area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Window Replacement in Lighthouse Point
Yes. Lighthouse Point is a HVHZ jurisdiction, which means every replaced window and door must carry Miami-Dade NOA-equivalent impact approval, regardless of whether your lot touches a canal. There’s no exemption for inland streets or non-waterfront parcels. The code applies citywide. If you’re planning a renovation, permit, or insurance renewal on any opening, impact-rated replacement is the only path. Call (863) 264-3649 and we’ll walk you through what your specific openings require before you spend a dollar.
Because Lighthouse Point’s nearly 50 miles of canals packed into 2.5 square miles create a salt-air micro-climate that reaches every home, not just waterfront parcels. Standard aluminum extrusions, and especially the weep holes and fastener points, oxidize under constant salt-laden exposure. That’s why we specify marine-grade aluminum and stainless hardware on canal-facing elevations, and why the cheap inland frame costs more within a decade. Call (863) 264-3649 for an exact quote on the coastal-spec material.
If the track is seized shut from aluminum oxidation, a sash-only replacement won’t fix the binding and won’t restore egress. In most Lighthouse Point lanai doors we open, the frame corners and weep holes are pitted through, which means full frame replacement is the only repair that meets code and holds a warranty. We’ll inspect the opening, show you the corrosion, and give you our honest read before you commit to anything. Call (863) 264-3649 and we’ll come look.
Plan on $450 to $750 per opening for an inland-spec insert, versus $800 to $1,400 for the marine-grade, impact-rated coastal-spec version. Full frame replacements start around $1,200 per opening and climb from there. The gap is the difference between a window that lasts and one that pits, seals fail, and needs replacement again inside a decade. We’ll show you both specs side by side on paper so you can decide with your eyes open. Call (863) 264-3649 for a free written estimate.
Look for fog or haze between the two panes, especially in the morning. If the glass has a milky film you can’t wipe off from either side, the seal has failed and the argon or krypton fill is gone. Another tell: the window doesn’t hold temperature, feels warm to the touch in summer, or rattles in wind gusts. In Lighthouse Point, seal failure from salt-degraded weatherstripping and fasteners is common even when the glass looks intact. Call (863) 264-3649 and we’ll tell you honestly whether it’s worth fixing or replacing.
If your windows are fighting the salt air and losing, call (863) 264-3649. We’ll quote the fix in writing, register both warranty layers, and stand behind the work for 90 days with no paperwork fights. If the pane is not true, the job is not done.
Written by Dale Kessler, Owner at TruePane Windows & Doors.
Six Reasons Homeowners Choose TruePane Windows & Doors
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.



Before
After
Before
After
Before
After